> From: Edwin Morrow <[EMAIL PROTECTED]>
Ed, try these for basic info;

http://www.everymac.com/systems/apple/powermac/stats/powermac_7200_75.html

http://lowendmac.com/ppc/7200.shtml

> I have a 7200/75 that I want to open and install more ram.
> I understand you can add ram in 32 meg chips.

Looks like 512MB total in 4 slots, that would be 128MB modules.

> Do all the chips have to be of the same brand as in some Macs or can
> you mix up manufactures?

I don't think makers are important, but absolutely no *EDO* RAM in the 7200
is what I read on this list ...

> Also, is there room for a second drive?

Specs say there is another drive bay in there.

> It was suggested that I just swap my old drive over as I don't really have the
> means to transfer all my old data to the new HD,
> but I want the new HD is the 7200 as it has a higher os system 8.6.1 where
> as the old HD  has 8.5.
>
Should be able to add the new drive and keep the old one also.
You will prolly need a sled to fasten it in. Not sure if there is an extra
SCSI connector on the ribbon cable and the extra plug for 2nd drive.
But there are plenty of experienced hands on this list to fill in the
details ...
Also make sure and get the SCSI ID #s and termination configured correctly.

> Thanks in advance.
> 
> Ed


-- 
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
 -- Sonnet & PowerLogix Upgrades - start at $169   |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:   <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:   <mailto:[EMAIL PROTECTED]>
For digest mode, email:  <mailto:[EMAIL PROTECTED]>
Subscription questions:  <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to