On 12/7/02 8:16 PM, "Edwin Morrow" <[EMAIL PROTECTED]> wrote:
> I have a 7200/75 that I want > to open and install more ram. > How do I open it? Also, I > understand you can add ram in > 32 meg chips. Do all the > chips have to be of the same > brand as in some Macs or can > you mix up manufactures? > Also, it there room for a > second drive? It was > suggested that I just swap my > old drive over as I don't > really have the means to > transfer all my old data to > the new HD, but I want the new > HD is the 7200 as it has a > higher os system 8.6.1 where > as the old HD has 8.5. > > Thanks in advance. > > Ed > Easy, There are two latches in the front of the box. One is down below the label that says "Power Macintosh 7200/120, and the other is beneath the CD eject button. They are round shaped. Just push up on them at the same time and pull forward. Incidentally, I have the take apart manual in PDF format. It's about 1.6MB. If you'd like I'll forward a copy as an attachment. Richard Skipp -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
