Does anyone out there know an online resource with jumper settings for SCA (80-pin) drives? I have a 9 gig WD SCA drive with an adaptor I want to use as a backup drve. The problem is that neither a hacked copy of Drive Setup nor Hard Disk Toolkit recognizes the drive. I put jumpers on SCSI ID 1 pins (ID I wanted for the drive) on both the drive itself and the adaptor, but the drive doesnt show up (on my 7500/G3 running OS9.1). Other than the termination pins (the drive isn't at the end of the SCSI chain, so it doesn't need termination), what other pins should have jumper blocks on them?
Heok Hee -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
