In a message dated 1/7/03 5:03:40 AM, [EMAIL PROTECTED] writes: << > ... I'm ready to play with a 9600 motherboard ...
... You can change the bus system crystal with a more powerful one. The best is to first replace the soldered crystal with a crystal connector ... >> Be advised that the processor daughter card's heat sink will barely clear the oscillator can, as-is. If you add a socket to the daughter card ... and this actually is a pretty good idea ... you will have to mill the underside of the heat sink in order to accommodate the added height attributable to the socket. This is not a particularly difficult machining job, but it requires detailed drawings and access to a milling machine and supporting tooling. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
