> > but you are reminding me that an IDE bus can take two devices, if one is >> master and one is slave. >> >> which makes me ask if this machine's IDE controller can handle 2 >> devices on the IDE bus. >> >> what if I forsook the internal scsi bus, and instead put a 2 device IDE >> ribbon on the IDE bus, and set my IDE hard drive to master, and the DVD >> drive to slave? >> >> >> apple never expected us to do this...but if IDE can take 2 devices.. >> could I?. >> >In order to do that on a beige G3, you need a ROM upgrade. Haven't seen >anybody talk about ROM upgrades for other machines. > Interesting I have a PM 7300 with an ATA66card and a burner and hd as master and slave, will it work better with a ROM upgrade ? (it works very well, but the jumpers are opposite/mirrorwise to the specs suggestion for apple, NO i did not hold the manual upside down) kenta --
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
