On 3/2/03 5:36 am, "Fred" <[EMAIL PROTECTED]> wrote: >> In a message dated 2/2/03 8:47:55 PM, [EMAIL PROTECTED] writes: >> >> << >> I have an original 9600 233Mhz daughter card that says on it "for 9600 only" >> Will I run into any trouble with it on a 9500/120. >>>> >> >> 200 MHz is the max for a non-Kansas mobo, which includes the original 9600, >> the 9600MP and the 9500 (AKA "Tsunami" and "Tsunami w/ROM"). >> > > Seems somewhat odd. I purchased a 9600/200DP, pulled the DP card and > dropped in a ZIF carrier with a G3/400 and it works just fine.... Hi I had a 9600 233 card in my 7300 so yes it will work just remember after pulling the old card reset the cuda switch then reseat the new card .
Victoria. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
