On 2/2/03 11:56 PM, "pdimage.fsnet.co.uk" <[EMAIL PROTECTED]> wrote:
>>>> I have an original 9600 233Mhz daughter card that says on it "for 9600 > only" >>>> Will I run into any trouble with it on a 9500/120. >>>>>> >>>> >>>> 200 MHz is the max for a non-Kansas mobo, which includes the original 9600, >>>> the 9600MP and the 9500 (AKA "Tsunami" and "Tsunami w/ROM"). > > I am fairly sure there was/is a 250mhz processor available for the > 7/8/9 pre Kansas macs unless it's only for the Stormsurge models - I > believe poweron.com sell them as I have seen them on ebay lately for > 20/30 dollars - if I can find a link I'll post it. Well the 233 daughter card is actually running at 250mhz. I replaced the original crystal 46.6mhz with a 50.0mhz. I have it now running in the 9500 for the last couple of hours and all seem fine!! -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
