Dumb question, ok, so I think I've been making an error. Is the cuda button located near the power supply on a 7500?
no it s located under the processor card, you probably need to lift out the processor to reach it.
Next dumb question, why doesn't the replacement 1.4 Mb floppy drive read the disks that my previous unmagnetized drive did? And why won't it format any disks? Will it have something to do with the errors I've been getting? I was assured that my drive would work. I bought two. The first one won't read any disk and when I try to format a disk, it fails without any reasoning. The second drive won't read, format or eject any of my disks.
are they old PM 7x00 series floppy drives ? I now that a floppy drive from an old LC or Quadra will not work, it will fit, but it will just eject the floppy.
you have 24 mb of ram total ? Can you do I clean isntall of either 8.1 or 7.6 ?
L --
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
