On 14-01-2004 23:53, A.Tuazon, [EMAIL PROTECTED], wrote: > Hi, I have a 7300 with 272MB of RAM running OS 9.1. > <snip> > It worked yesterday.
Had this with a 740 and a beige G3 OS 9.1, 2 x USB + 2 x FW -card. Would say: Try this: 1) Mac on, printer connected and powered on, unplug USB on Mac. Wait for around 10 secs and replug. 2) If not working try another USB-port/change ports. In case you have the printer connected to an USB-hub: Is this hub selfpowered? If no: Connect printer directly to USB-card (or take a powered hub). Still nothing: Trash all printer-prefs and try again. Still nothing again: Take Sherlock to help, trash all Epson-printer-whatever and re-install driver from CD or internet. M.2-cents.I and HTH, Jo -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
