Hi All, I think I have tracked down my problems. I have TechTools pro and I have run that and when I open the ram window I see some very strange things in the slots. I would run the ram check and everything would check out fine. But in the window its self I had two ram chips that instead of coming up with 128mb would come up with a negative number. Then there is one chip that came up with 1024mb. Then one slot (B6) kept coming up with 1024mb even though there was nothing in the slot. I think I have finally got things fixed as I pulled 3 128mb chips and at this point when I go into the ram window all seem to show up just fine. I believe I fried a motherboard in a power tower pro I had becasue of bad memory and I don't want to do it to this machine. It is hard to lose that much memory but I would rather do that than lose my machine. Does anyone know of where I might get a good ram checker program that would tell me for sure what ram was good and what was bad?
Thanks so much. Pam -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
