> Since drive was working, and quit try this.
> See if you can get control of drive by booting from 9.x cd w/ hard drive
> power plug pulled. After boot, plug drive power in. try running drive setup.
>
> charles lenington
>It's not clear from your original post as to whether you have the HD in
>question set as a master or slave?? maybe use your old 4GB disc as the
>master and see if that helps.
Tried both, first I dug into the thing, whoever dreamt up the 6500 case
was a sadist, the cable is a harness deal and without a female to female ATA
ribbon adapter I can't do the master-slave arrangement. Is there such a
beast?
Unfortunately, booting off CD and running Drive Setup the drive was not
recognized.
I might have to have someone with a PC do reformat for me.
Thanks All,
David
--
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
