on 2/15/04 9:18 AM, Christopher Bischoff at [EMAIL PROTECTED] wrote: > Greetings all > > I've sold a working pull IBM Ultrastar 36 gig drive to a swaplister, > and he is having problems mounting it in his 9600. I quote: > > "To be more specific on the drive: It spins up when the computer turns > on, > but before Mac OS starts booting, the drive spins down. Whenever I try > to > do things with Hard Disk Toolkit, it gives me an error about the device > not > being ready. When I try to do anything within FWB Configure, I get an > error: "Drive not ready to perform this command, it may need to be > started." >
> Other than his main internal HD not being set to ID 0, this is > identical to the working set up from my 9600. Could the first drive > being set to ID 2 be causing the problems? > > Thanks much, > > Chris > Is he using a Wide card or a plastic adapter to use that drive in the 9600? Jeff -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
