[...] > The one that goes to the front seems to be soldered to the powersupply's board (6300). Maybe I doing something wrong? I am talking about the longest of all three. It runs underneath the floppy drive's base metal plate, and ends on the left side of the mother board connectors, underneath theCD drive base metal plate. I can see it, but can't unplug that end either.
Odd. There should be a tan colored 2 prong one, the large one, and a thin white one that's about 5/8 inch or so long. It should just come right off when pulled: The connector type doesn't have a latch to release it. Its very thin, but I've never seen one that's actually soldered to the board before. This is the one that goes to the power switch.
You're right. It was not soldered. It came off. I am seeing things... I'll continue and let you know what happens later. Thanks again.
Haroldo
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
