> Thank very much Russ, for the step by step instructions. They're a > big help. I am practicing on the 6300 because I can't afford to > damage the 6360.
They slightly changed this case at one point, and the bracket on the fan is sometimes not there. My 636 doesn't have it, but my 6360 does. I'm not sure when it was done, so your 6300 may or may not have it. > >8. Remove the (3) power connectors from power supply: (1) > large one that > >is main power, (1) that goes to front of machine to power > switch, and (1) > >for fan. > > The one that goes to the front seems to be soldered to the power > supply's board (6300). Maybe I doing something wrong? I am talking > about the longest of all three. It runs underneath the floppy drive's > base metal plate, and ends on the left side of the mother board > connectors, underneath theCD drive base metal plate. I can see it, but > can't unplug that end either. Odd. There should be a tan colored 2 prong one, the large one, and a thin white one that's about 5/8 inch or so long. It should just come right off when pulled: The connector type doesn't have a latch to release it. Its very thin, but I've never seen one that's actually soldered to the board before. This is the one that goes to the power switch. --> Russ -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
