Haroldo Mauro Jr. wrote:Hi, my name is Harold, I subscribe to other Macintosh lists and now I've just joined the PCI PowerMac list. I want to slide a Performa 6360 logic board inside a 6300 cabinet, using the power supply of the latter. Would that be OK? Any risk involved? The reason is the 6360 has a lot of rust, and someone just gave me a look-like-new Performa 6300. In the 6360 board there is a Crescendo L2 card and an Ethernet PCI card.
As long as you swap the power supply, it should be fine.
I recently put a 6360+PS into a 636, and the only issue was the back face plate no longer fitting (as expected; You shouldn't have that issue).
--> Russ
Thank you. It seems difficult to me to remove the 6300 power suply, the 6360's as well. There is one cable I couldn't figure what it connects to and how to disconnect it. Any advice on swapping the PSs? Is there a site with instructions on how to take these machines apart and put them back together?
Thanks again, Harold
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
