Since you have had success with the 64s in A6/B6, can you leave in the 64s and in the rest of the banks put the 32's? have you tested the 32s extensively with Gauge Pro? Can you adjust the bus/clock speed on your G3 upgrade card, perhaps ease it back a fraction in respect to bus and/or clock?
David Elmo >> I remove the 32 mb DIMM's by pairs (a6/b6, a5/b5, etc.) until I was down to >> 1 pair left, attempting to initialize after each one, with the same failure. >> I removed those, and put in 2 64 MB DIMM's in A6/B6, and tried it again. It >> worked. Did you get that? IT WORKED. What the [EMAIL PROTECTED] is going on? >> >> Other than this initialization issue, the 32 MB DIMM's have been fine. >> >> I am so confused, baffled, stumped, puzzled, perplexed, mystified, and >> bewildered! >> >> --> Russ -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
