I've ended up with an extra desktop G3 case and motherboard, so I'm trying to put the rest of the computer together...(it will give me one to play with OS X, networking, etc. or maybe to pass along). The case has the bezel for the zip drive, and I've got both a scsi and an ide zip mechanism...but I'm puzzled as to how the drive would mount to line up with the bezel. If I use a typical 3.5 drive mounting sled, the zip ends up too low...by half an inch or so...to match the slot in the case. What sort of mounting did the drive have stock? Or how can I fabricate something to make the drive line up?
All ideas welcome... Was the stock zip in these ide or scsi? There seem to be both cables available for use... -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
