In the wee hour of 02:23 PM 5/2/01 +0200, Meir Cahal bequeathed such tales
as these:
>First of all take everything apart, try running the mother board with the
>processor & memory only with a different power supply. Maybe the voltage is
>to low on the power supply. Have you checked all the jumpers on the board?
>Do this first and see if it works
>Regards
>Meir
>
No jumpers on the board, it is a soft menu board. Though the voltage may
be suspect. Thanks for the tip.
Peter Kaulback
I haven't failed, I've found 10,000 ways that don't work.
Thomas Edison (1847-1931)
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
