I'm presently working on an 800 mhz Athlon, Abit KT-7 w/ 128 mb ram. I
tested the board with the power supply and video only for 3 hours and it
ran fine. Put the hard drive in (8 gb Quantum Bigfoot) and it ran
fine. The same for the SB-16 sound card and AOpen 56k WinModem, each one
installed separately with no errors. I then ran the complete system for 15
minutes at which point the monitor shut off and the system failed to
respond. I shut off the system and then it won't even come on. It is
completely dead now. The cd rom, floppy, sound card and hard drive are
from an older system, all of which ran fine in it not more than 2 days
ago. I'm stumped. I had the power supply running on another system, this
one right now in fact and it was flawless. Any idea's would be greatly
appreciated.
Peter Kaulback
I haven't failed, I've found 10,000 ways that don't work.
Thomas Edison (1847-1931)
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
