Well, The columns I had problems with were too small. I could not figure out why I only had the problem in certain columns. Even though I could see all the digits, in the cell, it appeared wide enough, if I widened the cell, the format did not change. I did have to make sure the format was set to 'general' or 'text would work. I appreciate all the input.
Jeff mailto:[EMAIL PROTECTED] www.9-11-2001tragedy.com Help those affected by the NY/PA tragedy: The Red Cross needs is mobilizing a national blood drive and needs your help. Please call 800-GIVE LIFE, to find out where in your area you can donate blood. FAX 1-413-280-0677 Intrepid Video & Electronics Harrisburg, PA 17111 717-909-8844 www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com ----- Original Message ----- From: "Jeff Dougherty" <[EMAIL PROTECTED]> To: "PCWorks mailing list" <[EMAIL PROTECTED]> Sent: Sunday, October 28, 2001 10:20 PM Subject: PCWorks: EXCEL 2002 problem > In some instances, when trying to enter digits, this program thinks it is a > date or scientific equation. > How can I turn this off? Sometimes I can do it on a cell-by-cell basis, but > it has become bothersome. > I've looked under the Format tool bar, checked/unchecked a few things, but > it still happens. > What am I missing? > Thank you. > > Jeff ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
