Have you defined your print area. It sounds as if you are printing the entire page rather than just the data area. Go to File, Print Area, Define. Also you can set the requirement to print all columns on one page or all rows or both from File, Page Setup.
Keith Thompson Meir Cahal wrote: > > Could someone shed some light on this Excel problem. > I have prepared a document in Excel and the default font is in 10 point. > When printed the document is hardly readable, not big enough. I have tried > increasing the font to 12, 16 and even 20 point but the document will only > print small even though on the screen the writing is large. I have also > adjusted the page setup to 100% but still no change. Any advise would be > greatly appreciated. > > Sincerely > > Chana Cahal -- Keith Thompson, Worthington, OH Home Web Page: http://freepages.family.rootsweb.com/~kthompson/ Genealogy Web Page: http://freepages.genealogy.rootsweb.com/~kthompson I Didn't Climb to the Top of the Food Chain to Be a Vegetarian ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
