If I recall from my 3.1 days, your mouse driver needs to be loaded last. You may have to play around with the config.sys and autoexec.bat to reposition the load order, but you should be able to find an order that will work. The other thing was that a hot boot would not restore the mouse. I would have to go all the way down to shutoff and then startup in order to get it to work so when you are trying different locations of loading, be sure to shut all the way down.
Keith Thompson Vern wrote: > > Remember when? Have a 486 with Win3.1 and no mouse appearing in Windows. > Have tried 3 different mice. None are seen in Windows. I think I saw in the > POST that it said mouse was on COM 1. Must be soft ware problem. I checked > the autoexec.bat and the driver is being loaded. (or called anyways) > > It's a bit difficult getting around without a mouse. <G> > > Vern -- Keith Thompson, Worthington, OH (mailto:[EMAIL PROTECTED]) Home Web Page: http://freepages.family.rootsweb.com/~kthompson/ Genealogy Web Page: http://freepages.genealogy.rootsweb.com/~kthompson Age and treachery can always overcome youth and skill. ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
