** Original Message From: [EMAIL PROTECTED] ** >*easiest* thing for you is to get the combo from them, and >just replace the fan. Note though, that since you have THREE >2" fans on that heatsink (if this is the case) and two are >still working, you don't even need to replace the bad one. >Most of these PII HS & fan units only had one fan on them.
Thanks Clint, there are three heat sinks but only one fan so I'll just get the heat sink and fan but just use the fan. Now, on another fan issue, the fan in the power supply makes noise for a minute or two when I first turn on the computer. I opened the power supply and there is no connector for the fan. Can I cut the wires and splice the wires from a new fan at that point? There are two wires and I think i read somewhere that if they get connected wrong the fan will run in the wrong direction. Is this correct? Thanks again, Tom ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
