Ok, regardless if that is the uATX or LPX, 75mhz is it's maximum FSB so like I said, 366mhz is going to be the max. So he's going to need a new mobo because of that alone. (I made a typo below, that should have read 366mhz, not 333mhz). If that's the SL5598 with both 72 pin and 168 pin slots; it supports 8mb minimum up to 256mb maximum, which I assume is the 168 pin slots; and 4, 8, 16 and 32mb FP/EDO which is probably the 72 pin slots. BCM is AKA GVC. -Clint
God Bless Us All Clint Hamilton, Owner Want to exchange links with us? http://OrpheusComputing.com � ----- Original Message ----- From: "Peter Kaulback" <[EMAIL PROTECTED]> Yeah, I discovered that Clint early this morning :( The board is a BCM 5598 with the SiS chipset with the 66 mhz bus. It is a highly limited board but still quite functional. However if my friend wants XP he's going to have to build a new system. Thanks, Peter Kaulback In the hour of 02:02 AM 26/03/2003 -0600, [EMAIL PROTECTED] spoke this: >What's the model # on the mobo? > >If that's the 66mhz FSB K6-2 300, the board may only go up to >333mhz. If it's the 100mhz bus K6-2 300, it may go up to faster >100mhz bus CPU's (350mhz +). >-Clint > >God Bless Us All >Clint Hamilton, Owner >http://OrpheusComputing.com � > >----- Original Message ----- >From: "Peter Kaulback" <[EMAIL PROTECTED]> > > >I have a friend's Packard Bell 750C computer. The hard drive has >gone south >and is being replaced but my friend would like to upgrade it from >it's K62 >300 mhz to a 450 or 500 mhz and to increase the memory as well. > >It uses 72 pin EDO presently. > >Does anyone have specs for this system, namely memory limits or >BIOS update. > >Peter Kaulback ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
