Thanks Bob. Seems like I'm screwed. Package to Pentax.
Paul
On Jan 27, 2008, at 9:39 PM, Bob Sullivan wrote:

> OK, from the back of the camera...
> Pin pattern is
>
> p    v
>    v
> v    v
>
> My error, the pin is in the front left seen from behind.
> Obviously, the cowling on the K10D front precludes access to that part
> of the shoe.
>
> The good news is that the hole is oversized.  The pin OD is probably
> 75% of the hole OD.
> So there is some wiggle room for it.
>
> When mounted, my FIX lever moves to the right - about 3:30 on the
> clock face when looking down from the top.  When unlocked, the lever
> moves over to about 7:30.  The locking ring rides up and closes the
> gap with the flash body above, and opens a gap with the shoe below.
>
> Hope this helps.  Bob S.
>
> On Jan 27, 2008 8:15 PM, Paul Stenquist <[EMAIL PROTECTED]>  
> wrote:
>> Don't see it. With the flash in the locked position, I see only black
>> plastic above the locking collar at the front of the flash. Ditto
>> below it as well. Banging on the housing and working the lever have
>> had no effect.
>> Paul
>>
>> On Jan 27, 2008, at 5:27 PM, Brendan MacRae wrote:
>>
>>> Paul,
>>>
>>> I just noticed something, ignore my last post!
>>>
>>> There's a pin rides on the top of the lock if you look
>>> at the front of the flash. That is part of the
>>> mechanism for the locking pin.  With the flash in the
>>> locked position, use a small flat bladed screwdriver
>>> to lift this pin up and that should free the locking
>>> pin (as long as it's not bent).
>>>
>>> -Brendan
>>> --- Paul Stenquist <[EMAIL PROTECTED]> wrote:
>>>
>>>> Yes, it's true. I mounted the 540 flash on the K10D
>>>> this afternoon in
>>>> an effort to shoot some birdies, and now it won't
>>>> come off. I tried a
>>>> little bit of WD40 ( a light lubricant), lots of
>>>> tugging and pulling.
>>>> I'm guessing that a screw has come loose on the hot
>>>> shoe and is
>>>> locking it in place. Any ideas? I'm thinking I'm
>>>> going to have to
>>>> send camera and flash to Pentax. A pisser.
>>>> Paul
>>>>
>>>> --
>>>> PDML Pentax-Discuss Mail List
>>>> [email protected]
>>>> http://pdml.net/mailman/listinfo/pdml_pdml.net
>>>> to UNSUBSCRIBE from the PDML, please visit the link
>>>> directly above and follow the directions.
>>>>
>>>
>>>
>>>
>>>
>>> ____________________________________________________________________ 
>>> __
>>> ______________
>>> Never miss a thing.  Make Yahoo your home page.
>>> http://www.yahoo.com/r/hs
>>>
>>> --
>>> PDML Pentax-Discuss Mail List
>>> [email protected]
>>> http://pdml.net/mailman/listinfo/pdml_pdml.net
>>> to UNSUBSCRIBE from the PDML, please visit the link directly above
>>> and follow the directions.
>>
>>
>> --
>>
>> PDML Pentax-Discuss Mail List
>> [email protected]
>> http://pdml.net/mailman/listinfo/pdml_pdml.net
>> to UNSUBSCRIBE from the PDML, please visit the link directly above  
>> and follow the directions.
>>
>
> -- 
> PDML Pentax-Discuss Mail List
> [email protected]
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above  
> and follow the directions.


-- 
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to