2010/6/10 steve harley <[email protected]>:
>
> i'm not an RF engineer, but i was under the impression external devices
> generally cause worse EM interference

yup, for said regulatory deficit/void and subsequent lack of shielding
if I got him right

> i looked at Digisol's site, and see that it claims its readers do 32 MB/sec,
> in other words very similar to the claimed performance of Apple's built-in
> reader; then i looked for a benchmark and found the Digisol reader topping
> out at just over 19 MB/sec read speed for SDHC; interestingly, Memory Stick
> got the best numbers in this reader, about 33 MB/sec

yeah they have several models, one better for CF, one for SD and this
one optimized for MS

> <http://www.hjreggel.net/cardspeed/speed-by-reader-dsg1.html>

Beware, old benchmark, there was a chip revision and Digisol recalled
for replacement after the 300x CF issue. I can confirm the 19 MB/s for
SDHC though and I am pretty content with that seeing it is a SanDisk
20 MB/s edition for whatever that means as there is opinion floating
around the net that the 30 MB/s isn't much faster and the 20 can come
clos eto 30 on peak, too... personally I just buy SanDisk for
reliability and Digisol because everyone on amazon seemed so happy
with it... it is a card reader and not a lens, after all.

Speaking of which, happy happy joy joy micro enablement, I scored a
new B+W Käsemann slim build circular polarizer for less than 40% of
amazon =)

Cheers
Ecke

> the site is hard to navigate, but it looks like a JMicron XpressCard unit
> did the best with SDHC, at about 23 MB/sec
>
> <http://www.hjreggel.net/cardspeed/speed-by-reader-j389.html>
>
>
>
>
>
> --
> PDML Pentax-Discuss Mail List
> [email protected]
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and
> follow the directions.
>

-- 
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to