Thanks for supplying those links. I'm not able to access the pins while it's plugged in and I'm a bit reluctant to run it disconnected as switchmode power supplies tend to need some load to operate correctly. And with the plugs out it probably won't switch on as the soft-power switch is out on the front panel and connected to the motherboard. The power-on signal needs to get through somehow :)
Dave On Jan 31, 2014, at 8:42 am, Paul Sorenson <[email protected]> wrote: > Links below to tables of the pin-out voltages on the G5 power supply. Should > be able to check these with a good high impedance volt meter. > > P1 Connector... > http://d3nevzfk7ii3be.cloudfront.net/igi/meMD2v3echZtptCG.large > > P2 and P3 Connectors... > http://d3nevzfk7ii3be.cloudfront.net/igi/KIX3V2Cxcc2Ee5On.large > > Info from this page... > http://tinyurl.com/n6jhbq6 > > -p -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
