I normally ride about 100 miles a week and like to keep a high pressure in the tyres, which are 700x25 at the moment and I pump them up to just over 100 psi. Usually after about 2 weeks I feel as though they need a bit more so I give them a bit more, but it's usually not much.
In France I pumped them up after about 10 days. I'd lost quite a lot of air quite suddenly from the front, but it turned out that the valve had loosened up a bit and I didn't have to do any patching. How old are the tubes on yours? Maybe you have a slow puncture. Life's too short to mess around with that type of stuff when new tubes are so cheap. B > On 24 Jul 2014, at 19:28, "Ken Waller" <[email protected]> wrote: > > Along similar lines I'm wondering how often bike riding list members have to > inflate their tires. I have a few year old Trek with tires that need > reinflating every few days. > > Don't remember having this issue with my last bike, a 24 year old Cannondale > or way back when I was growing up. > > Kenneth Waller > http://www.pentaxphotogallery.com/kennethwaller > > ----- Original Message ----- From: "Richard Womer" <[email protected]> > Subject: Re: Way OT -- Arcane bicycle question > > >> Thanks, guys. I'll check out Sheldon Brown's site. Steve, the >> discussion at that link spans the whole range of opinions, from "no >> problem!" ro "almost certain disaster." >> >> Meanwhile, I closely examined the tire in question, and there is a >> small area where it has started to delaminate along the bead. Since >> it's off the rim, I don't know if that is where the bulge was >> appearing or not; but for now I think I'll just get another tire. >> >> Bob, the next time I get a flat I'll pop on over and check in with you >> and Chris! >> >> Rick >> http://photo.net/photos/RickW >> >> >>> On Thu, Jul 24, 2014 at 1:22 AM, David Mann <[email protected]> wrote: >>>> On Jul 24, 2014, at 12:05 pm, Rick Womer <[email protected]> wrote: >>>> >>>> Short version: The rims are "hookless" dimpled Weinmanns. Is there a >>>> modern tire that will stay on a hookless rim? Or, how do a get a modern >>>> tire to stay on? >>> >>> Could you try a tubular? They're tires with the tube sewn into the casing >>> and are normally glued onto the rim. Still quite easy to get as many >>> racers swear by them. I find them expensive and fiddly and am thinking >>> about selling my tubular race wheels to get some clinchers. >>> >>> Failing that, perhaps you could find more info on Sheldon Brown's website. >>> That's a treasure trove of information about bikes. >>> >>> http://www.sheldonbrown.com/ >>> >>> Cheers, >>> Dave > > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above and follow > the directions. -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
