Nukien wrote:
One possibility is the netlist is corrupted, and has TWO different nets both namedWeird. Not working here.
I have polygons on top and bottom layers, both on GND net. I drop a via on a blank spot, and it picks up the GND net just fine. I can verify that in the properties for the via.
I then redo the polygons, they rebuild, but the via is isolated. But it
still has the GND net associated with it, and there's a rats-nest line
leading to the nearest pad on the GND net. If I select the via, the whole
GND net is highlighted as you would expect. Even weirder, DRC doesn't flag
a Broken Net error ...
"GND". Scan the netlist to see if you have this. When the netlist gets garbled, I
usually delete the netlist, create a netlist from schematic and then load the netlist.
When this gets messed up, the update PCB from netlist usually will just keep
scrambling things.
Jon
____________________________________________________________ You are subscribed to the PEDA discussion forum
To Post messages: mailto:[email protected]
Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com
Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected]
Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
