o-----------ooO--(- Important Message -)--Ooo------------o
| |
| SAVE BANDWITH, SPACE, TIME & MONEY, REPLY WITH PRUDENCE.|
| |
o----=[ Penguin @ My - Linux ([EMAIL PROTECTED]) ]=----o
Right.., i've got the rough idea now. But for the trading.., i'm so sorry
daniel.., coz this is belong to my company.., not myself.
Anyway thanks for your help. Thanks for everyone.
>
> >-- brand seagate model ST318275LW
> > perhaps this can help
>
> This seems to be a Seagate Barracuda 18LP drive. It's 18GB, with a 68pin
> connector. It is LVD (Ultra2Wide - 80MB/s). No termination on the drive.
You
> WILL need external termination. LW models usually have onboard
termination,
> but since this is a LVD model, it doesn't have it.
> http://www.seagate.com:80/cgi-bin/view.cgi?/scsi/st318275.lw for info on
> your drive.
>
>
>
> >-- The chip was covered by other labeled. So i can see it. Hehe.., afraid
> >to
> >tear the label coz.., the warranty may avoid. Maybe this can help you..,
> >AHA-294UW PRO 1800000 A 9928 (this number was printed on the labeled).
>
>
> This happens to be a regular UW card. You are running the UW chain at
40MB/s
> (half of your drive). In theory, your drive should be able to switch over
to
> running in UW SE mode. Some drives aren't too backward compatible. Jumper
> set J2 at the front of the drive has a pin #8 that if jumpered will force
> your LVD drive to run in SE mode.
> What I would recommend getting a LVD capable card like the Adaptec
2940U2W.
> Notice the 2 between the U and W. That means it's a Ultra2 Wide card.
>
> If you can't force the drive to work with the card right, either change
the
> drive for an SE model (don't think there's one for this family) or get a
U2W
> capable card. Sorry dude. If you want, I can trade you for it depending on
> where you are. Get you a 18GB SE drive and you trade me your LVD :) Don't
> count on it though, I'm in the US right now.
>
> Hope this helps.
>
> Daniel
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
> -
> Disclaimer : http://users.my-linux.org/disclaimer.html
>
>
-
Disclaimer : http://users.my-linux.org/disclaimer.html
