Bruce Momjian wrote:
> Tom Lane wrote:
> > Bruce Momjian <[email protected]> writes:
> > > Tom Lane wrote:
> > >> Yeah. I think the only sensible way to do this would be to provide an
> > >> operating mode for the postgres executable that would just parse the
> > >> config file and spit out requested values.
> >
> > > That would certainly solve the problem, though it would have to be
> > > backpatched all the way back to 8.4, and it would require pg_upgrade
> > > users to be on newer minor versions of Postgres.
> >
> > I would just say "no" to people who expect this to work against older
> > versions of Postgres. I think it's sufficient if we get this into HEAD
> > so that it will work in the future.
>
> Well, it is going to work in the future only when the _old_ version is
> 9.2+. Specifically, pg_upgrade using the flag could be patched to just
> 9.2, but the flag has to be supported on old and new backends for that
> to work.
OK, I started working on #3, which was to start the servers to find the
data_directory setting, and developed the attached patch which mostly
does this. However, I have found serious problems with pg_ctl -w/wait
mode and config-only directories (which pg_upgrade uses), and will start
a new thread to address this issue and then continue with this once that
is resolved.
--
Bruce Momjian <[email protected]> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ It's impossible for everything to be true. +
diff --git a/contrib/pg_upgrade/option.c b/contrib/pg_upgrade/option.c
new file mode 100644
index bdb7ddb..e9c5f25
*** a/contrib/pg_upgrade/option.c
--- b/contrib/pg_upgrade/option.c
*************** parseCommandLine(int argc, char *argv[])
*** 112,121 ****
--- 112,123 ----
case 'd':
old_cluster.pgdata = pg_strdup(optarg);
+ old_cluster.pgconfig = pg_strdup(optarg);
break;
case 'D':
new_cluster.pgdata = pg_strdup(optarg);
+ new_cluster.pgconfig = pg_strdup(optarg);
break;
case 'g':
*************** check_required_directory(char **dirpath,
*** 319,321 ****
--- 321,379 ----
#endif
(*dirpath)[strlen(*dirpath) - 1] = 0;
}
+
+ /*
+ * adjust_data_dir
+ *
+ * If a configuration-only directory was specified, find the real data dir
+ * by quering the running server. This has limited checking because we
+ * can't check for a running server because we can't find postmaster.pid.
+ */
+ void
+ adjust_data_dir(ClusterInfo *cluster)
+ {
+ char filename[MAXPGPATH];
+ FILE *fd;
+ PGconn *conn;
+ PGresult *res;
+
+ /* If there is no postgresql.conf, it can't be a config-only dir */
+ snprintf(filename, sizeof(filename), "%s/postgresql.conf", cluster->pgconfig);
+ if ((fd = fopen(filename, "r")) == NULL)
+ return;
+ fclose(fd);
+
+ /* If PG_VERSION exists, it can't be a config-only dir */
+ snprintf(filename, sizeof(filename), "%s/PG_VERSION", cluster->pgconfig);
+ if ((fd = fopen(filename, "r")) != NULL)
+ {
+ fclose(fd);
+ return;
+ }
+
+ /* Must be a configuration directory, so query the server. */
+
+ prep_status("Finding the real data directory for the %s cluster",
+ CLUSTER_NAME(cluster));
+
+ start_postmaster(cluster);
+
+ conn = connectToServer(cluster, "template1");
+
+ res = executeQueryOrDie(conn,
+ "SELECT setting "
+ "FROM pg_settings "
+ "WHERE name = 'data_directory'");
+ assert(PQntuples(res) == 1);
+
+ pg_free(cluster->pgdata);
+ cluster->pgdata = pg_strdup(PQgetvalue(res, 0, 0));
+
+ PQclear(res);
+
+ PQfinish(conn);
+
+ stop_postmaster(false);
+
+ check_ok();
+ }
diff --git a/contrib/pg_upgrade/pg_upgrade.c b/contrib/pg_upgrade/pg_upgrade.c
new file mode 100644
index 0568aca..273561e
*** a/contrib/pg_upgrade/pg_upgrade.c
--- b/contrib/pg_upgrade/pg_upgrade.c
*************** main(int argc, char **argv)
*** 68,73 ****
--- 68,76 ----
parseCommandLine(argc, argv);
+ adjust_data_dir(&old_cluster);
+ adjust_data_dir(&new_cluster);
+
output_check_banner(&live_check);
setup(argv[0], live_check);
diff --git a/contrib/pg_upgrade/pg_upgrade.h b/contrib/pg_upgrade/pg_upgrade.h
new file mode 100644
index 46aed74..0fb16ed
*** a/contrib/pg_upgrade/pg_upgrade.h
--- b/contrib/pg_upgrade/pg_upgrade.h
*************** typedef struct
*** 187,192 ****
--- 187,193 ----
ControlData controldata; /* pg_control information */
DbInfoArr dbarr; /* dbinfos array */
char *pgdata; /* pathname for cluster's $PGDATA directory */
+ char *pgconfig; /* pathname for cluster's config file directory */
char *bindir; /* pathname for cluster's executable directory */
unsigned short port; /* port number where postmaster is waiting */
uint32 major_version; /* PG_VERSION of cluster */
*************** void print_maps(FileNameMap *maps, int n
*** 361,366 ****
--- 362,368 ----
/* option.c */
void parseCommandLine(int argc, char *argv[]);
+ void adjust_data_dir(ClusterInfo *cluster);
/* relfilenode.c */
diff --git a/contrib/pg_upgrade/server.c b/contrib/pg_upgrade/server.c
new file mode 100644
index 8c4aec9..d12ff64
*** a/contrib/pg_upgrade/server.c
--- b/contrib/pg_upgrade/server.c
*************** start_postmaster(ClusterInfo *cluster)
*** 164,175 ****
* vacuums can still happen, so we set autovacuum_freeze_max_age to its
* maximum. We assume all datfrozenxid and relfrozen values are less than
* a gap of 2000000000 from the current xid counter, so autovacuum will
! * not touch them.
*/
snprintf(cmd, sizeof(cmd),
SYSTEMQUOTE "\"%s/pg_ctl\" -w -l \"%s\" -D \"%s\" "
"-o \"-p %d %s\" start >> \"%s\" 2>&1" SYSTEMQUOTE,
! cluster->bindir, log_opts.filename2, cluster->pgdata, cluster->port,
(cluster->controldata.cat_ver >=
BINARY_UPGRADE_SERVER_FLAG_CAT_VER) ? "-b" :
"-c autovacuum=off -c autovacuum_freeze_max_age=2000000000",
--- 164,176 ----
* vacuums can still happen, so we set autovacuum_freeze_max_age to its
* maximum. We assume all datfrozenxid and relfrozen values are less than
* a gap of 2000000000 from the current xid counter, so autovacuum will
! * not touch them. When we are starting the server to find the real data
! * directory, controldata.cat_ver is zero, meaning we assume an older server.
*/
snprintf(cmd, sizeof(cmd),
SYSTEMQUOTE "\"%s/pg_ctl\" -w -l \"%s\" -D \"%s\" "
"-o \"-p %d %s\" start >> \"%s\" 2>&1" SYSTEMQUOTE,
! cluster->bindir, log_opts.filename2, cluster->pgconfig, cluster->port,
(cluster->controldata.cat_ver >=
BINARY_UPGRADE_SERVER_FLAG_CAT_VER) ? "-b" :
"-c autovacuum=off -c autovacuum_freeze_max_age=2000000000",
*************** stop_postmaster(bool fast)
*** 210,215 ****
--- 211,221 ----
const char *bindir;
const char *datadir;
+ /*
+ * Oddly, for config-only directories, pg_ctl _stop_ needs the real
+ * data directory to check postmasteer.pid, not the config directory.
+ */
+
if (os_info.running_cluster == &old_cluster)
{
bindir = old_cluster.bindir;
diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample
new file mode 100644
index a18f14a..b2f8239
*** a/src/backend/utils/misc/postgresql.conf.sample
--- b/src/backend/utils/misc/postgresql.conf.sample
***************
*** 46,52 ****
# (change requires restart)
# If external_pid_file is not explicitly set, no extra PID file is written.
! #external_pid_file = '(none)' # write an extra PID file
# (change requires restart)
--- 46,52 ----
# (change requires restart)
# If external_pid_file is not explicitly set, no extra PID file is written.
! #external_pid_file = '' # write an extra PID file
# (change requires restart)
--
Sent via pgsql-hackers mailing list ([email protected])
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-hackers
