Hi David
I would have gotten involved in this thread earlier if I had realised it
had moved to Visual Studio an wxWidgets and away from Cygwin. Sorry for
just reading the title and not the text.
I always use the visual studio IDE, I don't know if that is the route you
ended up going down. Have you found the instructions at
https://sourceforge.net/p/plplot/wiki/Configure_PLplot_for_the_Visual_Studio_IDE/?
They are a little out of date, but I don't think much has changed.
Phil
On 26 January 2018 at 14:57, David Bergman via Plplot-general <
plplot-general@lists.sourceforge.net> wrote:
> That worked. Are there any good tutorials for using this with wxWidgets
> and VC++?
> I think I need to set up the wxWidgets driver.
> You may hear from me again...
> David
>
>
> On Friday, January 26, 2018, 9:38:32 AM EST, Arjen Markus <
> arjen.mar...@deltares.nl> wrote:
>
>
> Hi David,
>
>
>
> That is easier – did you install the stuff via “nmake install” or are you
> working from the build directory?
>
>
>
> That is what I usually do and then I have to expand the PATH environment
> variable:
>
>
>
> set PATH=d:\plplot-build-dir\dll;%PATH%
>
> cd examples\cxx
>
> x01.exe
>
>
>
> Fill in the right directory for “plplot-build-dir” above.
>
>
>
> Regards,
>
>
>
> Arjen
>
>
>
> *From:* David Bergman [mailto:davidrberg...@yahoo.com]
> *Sent:* Friday, January 26, 2018 3:34 PM
> *To:* Arjen Markus
> *Cc:* Plplot-general@lists.sourceforge.net (plplot-general@lists.
> sourceforge.net)
> *Subject:* Re: RE: RE: [Plplot-general] More questions about install
>
>
>
> Arjen,
>
> Thanks, that worked to get past this hurdle. nmake and nmake install
> worked.
>
> Frankly, I'm not sure what state plplot is in but I tried running an
> example exe and got an error message that plplotcxx.dll is not installed on
> my computer.
>
> However, this *.dll does exists in the dll folder.
>
> How does that work?
>
> David
>
>
>
>
>
> On Friday, January 26, 2018, 8:15:24 AM EST, Arjen Markus <
> arjen.mar...@deltares.nl> wrote:
>
>
>
>
>
> Hi David,
>
>
>
> I was a bit hasty, I think – the cairo device driver actually consists of
> a whole slew of them and you would have to set all of them to off to avoid
> the cairo device (things like PLD_wincairo and PLD_epscairo). If I read the
> CMake files correctly, then you should be able to turn off that family of
> devices by -DDEFAULT_NO_CAIRO_DEVICES=ON. (I hope I am right this time)
>
>
>
> Regards,
>
>
>
> Arjen
>
>
>
>
>
> *From:* David Bergman [mailto:davidrberg...@yahoo.com
> <davidrberg...@yahoo.com>]
> *Sent:* Thursday, January 25, 2018 2:12 PM
> *To:* Arjen Markus
> *Cc:* Plplot-general@lists.sourceforge.net (plplot-general@lists.
> sourceforge.net)
> *Subject:* Re: RE: [Plplot-general] More questions about install
>
>
>
> Arjen,
>
> Thanks. I tried again with your suggestion but the following warning.
>
>
>
> CMake Warning:
> Manually-specified variables were not used by the project:
>
>
>
> PLD_cairo
>
>
>
> I tried variant, e.g. all cap, etc, just in case there was a typo. No
> luck.
>
>
>
> Any other suggestions would be appreciated.
>
> On another note, not sure is you saw my other email status. Installing
> from the IDE seemed to work for the Release build but not the Debug,
> several projects failed to build. I cannot decipher why one would build
> and the other not. Additionally the *.exe for the examples did not get
> created as in previous installs. It seems that each try produces a
> different state.
>
>
>
> Thank you in advance.
>
> David
>
>
>
>
>
>
>
> On Thursday, January 25, 2018, 2:44:51 AM EST, Arjen Markus <
> arjen.mar...@deltares.nl> wrote:
>
>
>
>
>
> Hi David,
>
>
>
> Wrt your message (it got caught in my spam filter for reasons best known
> to itself):
>
>
>
> “Arjen,
>
>
>
> I just installed CMake 3.9.4 and tried the build from a DOS command prompt
> (not using VS INSTALL). Same issues, partial output is attached.
>
> It crashes at ciaro [26%]. Do I need ciaro to use plplot?
>
>
>
> David”
>
>
>
> Apparently the build system is finding libraries that are connected to the
> cairo device. Unfortunately, they are not truly compatible. The best way to
> take care of that is to use the option –DPLD_cairo=OFF, forcing the build
> system to ignore that device. This kind of things sometimes happens.
>
>
>
> Regards,
>
>
>
> Arjen
>
>
>
>
>
>
> *Arjen Markus*
> Sr. Adviseur/Onderzoeker
>
> T
>
> +31(0)88 335 8559 <+31%2088%20335%208559>
>
> E
>
> arjen.mar...@deltares.nl
>
>
>
>
>
> * www.deltares.com* <http://www.deltares.com/>
>
> Postbus 177
> 2600 MH Delft <http://www.deltares.com/>
>
>
> <http://www.deltares.com/>
>
>
> Please consider the environment before printing this email
> <http://www.deltares.com/>
>
> DISCLAIMER: This message is intended exclusively for the addressee(s) and
> may contain confidential and privileged information. If you are not the
> intended recipient please notify the sender immediately and destroy this
> message. Unauthorized use, disclosure or copying of this message is
> strictly prohibited. The foundation 'Stichting Deltares', which has its
> seat at Delft, The Netherlands, Commercial Registration Number 41146461, is
> not liable in any way whatsoever for consequences and/or damages resulting
> from the improper, incomplete and untimely dispatch, receipt and/or content
> of this e-mail. <http://www.deltares.com/>
>
> DISCLAIMER: This message is intended exclusively for the addressee(s) and
> may contain confidential and privileged information. If you are not the
> intended recipient please notify the sender immediately and destroy this
> message. Unauthorized use, disclosure or copying of this message is
> strictly prohibited. The foundation 'Stichting Deltares', which has its
> seat at Delft, The Netherlands, Commercial Registration Number 41146461, is
> not liable in any way whatsoever for consequences and/or damages resulting
> from the improper, incomplete and untimely dispatch, receipt and/or content
> of this e-mail.
> DISCLAIMER: This message is intended exclusively for the addressee(s) and
> may contain confidential and privileged information. If you are not the
> intended recipient please notify the sender immediately and destroy this
> message. Unauthorized use, disclosure or copying of this message is
> strictly prohibited. The foundation 'Stichting Deltares', which has its
> seat at Delft, The Netherlands, Commercial Registration Number 41146461, is
> not liable in any way whatsoever for consequences and/or damages resulting
> from the improper, incomplete and untimely dispatch, receipt and/or content
> of this e-mail.
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Plplot-general mailing list
> Plplot-general@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/plplot-general
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Plplot-general mailing list
Plplot-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/plplot-general
