Hi David
I have a feeling you are looking in <build-directory>/include. You need to
install using the command nmake install, the libraries and required headers
will then be copied to the install directory. If you didn't specify an
install directory in your cmake command then the default is I think
something like <program-files>/plplot. Because this default directory
requires admin privileges to be written to you may need to do nmake install
from an elevated command prompt
https://www.lifewire.com/how-to-open-an-elevated-command-prompt-2618088
Fingers crossed this is the last obstacle :-)
Phil
On 4 February 2018 at 23:29, David Bergman <davidrberg...@yahoo.com> wrote:
> Phil,
>
> There was cygwin in the path. I removed it and rebuilt. It seems to have
> gone without any problems generating all the dll. However, I cannot fin
> any of the expected header files.
>
> The include dir only has
> plConfig.h
> plDevs.h
> pldll.h
> plhershwy-unicode.h
>
> David
>
>
> On Sunday, February 4, 2018, 1:48:51 PM EST, Phil Rosenberg <
> p.d.rosenb...@gmail.com> wrote:
>
>
> Hmm, not sure.
>
> Are you rebuilding the whole library? Did you clean out the old build
> directory? How did you download? Are any cygwin binary directories on your
> path?
>
> Phil
>
> On Feb 4, 2018 11:32, "David Bergman" <davidrberg...@yahoo.com> wrote:
>
> I am building on windows, DOS cmd build instructions as per
>
> https://sourceforge.net/p/ plplot/wiki/Configure_PLplot_
> for_Visual_CXX_CLI/
> <https://sourceforge.net/p/plplot/wiki/Configure_PLplot_for_Visual_CXX_CLI/>
>
> as before. cmake, nmake, nmake install.
>
> I downloaded from the link you sent, not sure what happened.
>
>
>
>
>
>
> On Sunday, February 4, 2018, 4:45:29 AM EST, Phil Rosenberg <
> p.d.rosenb...@gmail.com> wrote:
>
>
> Hi David
> Can I as what toolset you are using to build with?
> Libltdl appears to be gnu related, but I thought you were building with
> the standard windows toolset.
>
> Phil
>
> Get Outlook for Android <https://aka.ms/ghei36>
>
>
>
> From: David Bergman
> Sent: Sunday, February 4, 03:41
> Subject: Re: [Plplot-general] More questions about install
> To: Phil Rosenberg
>
>
> Scratch this last email, I discovered a typo in my cmake command.
> However, after getting past this I am now getting the following,
>
> Could not open driver module wxwidgets
> libltdl error: No error information
> NMAKE : fatal error U1077: '..\dll\test-drv-info.exe' : return code '0x1'
> Stop.
> NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual
> Studio\2017
> \Community\VC\Tools\MSVC\14. 11.25503\bin\HostX86\x86\ nmake.exe"' :
> return code '
> 0x2'
> Stop.
> NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual
> Studio\2017
> \Community\VC\Tools\MSVC\14. 11.25503\bin\HostX86\x86\ nmake.exe"' :
> return code '
> 0x2'
> Stop.
>
>
>
> On Saturday, February 3, 2018, 8:59:14 PM EST, David Bergman <
> davidrberg...@yahoo.com> wrote:
>
>
> Phil,
>
> I have the latest but I'm getting new build errors.
> The IDE install failed for most projects and eventually hung. This
> occurred before but restarting usually fixes.
> The DOS install failed on the nmake command,
>
> NMAKE : fatal error U1073: don't know how to make 'C:\\all'
> Stop.
> NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual
> Studio\2017
> \Community\VC\Tools\MSVC\14. 11.25503\bin\HostX86\x86\ nmake.exe"' :
> return code '
> 0x2'
> Stop.
>
> There were no errors in the cmake command and I'm doing this the same as
> before (after help from Arjen to turn off cairo devices).
>
> Could I manually add the code snippet to the header or do the libs need to
> be rebuilt with the change?
>
> Thanks,
> David
>
>
>
>
> On Saturday, February 3, 2018, 4:12:57 PM EST, Phil Rosenberg <
> p.d.rosenb...@gmail.com> wrote:
>
>
> Hi David
> I just had another look at the code comparing to the release you are using
> and you were absolutely right, there is a bug there. I have just fixed that
> and pushed the resulting code up to our git repo. You can pull the latest
> code from there at https://sourceforge.net/p/
> <https://sourceforge.net/p/plplot/plplot/ci/master/tree/>plpl ot
> <https://sourceforge.net/p/plplot/plplot/ci/master/tree/>/
> <https://sourceforge.net/p/plplot/plplot/ci/master/tree/>plplot
> <https://sourceforge.net/p/plplot/plplot/ci/master/tree/>/
> <https://sourceforge.net/p/plplot/plplot/ci/master/tree/>ci
> <https://sourceforge.net/p/plplot/plplot/ci/master/tree/>/master/tree/
> <https://sourceforge.net/p/plplot/plplot/ci/master/tree/> in your
> browser, or using git using the command
>
> git clone git://git.code.sf.net/p/ plplot/plplot
> <http://git.code.sf.net/p/plplot/plplot>
>
> Let us know if you are having any difficulties grabbing it.
>
> Phil
> *From:* David Bergman <davidrberg...@yahoo.com>
> *Sent:* Saturday, February 3, 2018 6:49:13 PM
> *To:* Phil Rosenberg
> *Subject:* Re: [Plplot-general] More questions about install
>
> Phil,
> Would the bug be in the header or the the call in the test code *.cpp?
> If it's the header then I'd like the new version. But if it's the driver
> then would the documentation on wxWidgets classes be informative?
> I notice typical declarations have wxTemplate<Type> * x = something(NULL),
> to initialize the variable.
> No such input appears in the driver.
> Thanks,
> David
>
>
> On Saturday, February 3, 2018, 11:20:08 AM EST, Phil Rosenberg <
> p.d.rosenb...@gmail.com> wrote:
>
>
> Hi David
> Can I just confirm which version of PLplot you are using or if it is a
> version grabbed from the git repo?
>
> I ask because the line numbers don't seem to match up with the version I
> have. But looking at my code I have a feeling that bug has been fixed.
>
> Phil
>
>
> On Feb 3, 2018 15:56, "David Bergman" <davidrbergman
> <davidrberg...@yahoo.com>@yahoo.com <davidrberg...@yahoo.com>> wrote:
>
> I tried running the wxPLplotDemo example and got the following compilation
> error:
>
> error C4703: potentially uninitialized local pointer variable 'drawDc'
> used on line 378 of wxplplotwindow.h
>
> Looking through the code it appears that every declaration of drawDC is as
> follows
>
> wxDC *drawDc = m_memoryDc;
>
> except the last function
>
> void wxPLplotwindow<WXWINDOW>:: setUseGraphicsContext( bool
> useGraphicsContext )
> {
> wxDC *drawDc;
> ...
> }
>
> I am not familiar with the details of the code but it appears that the
> variable is set to something before it is used. This is not modified code.
>
> Please advise.
> Thanks,
> David
>
>
>
>
>
>
>
>
> On Saturday, February 3, 2018, 4:01:05 AM EST, Phil Rosenberg <
> p.d.rosenb...@gmail.com> wrote:
>
>
> Hi David
> Yes, that's exactly what you need to do. <Type> can be pretty much any
> wxWidget window class, although I suggest using wxPanel. Using wxFrame
> works on Windows, but is apparently not good practice and some things don't
> work properly if you render directly to a wxFrame on Linux.
>
> In terms of a demo, check out wxPLplotDemo.cpp in the PLplot source code.
> It is in examples/c++
>
> Phil
>
> *From:* David Bergman <davidrbergman <davidrberg...@yahoo.com>@yahoo.com
> <davidrberg...@yahoo.com>>
> *Sent:* Saturday, February 3, 2018 1:59:39 AM
> *To:* plplot <plplot-de...@lists.sourceforge.net>-
> <plplot-de...@lists.sourceforge.net>devel
> <plplot-de...@lists.sourceforge.net>@lists. sourceforge.net
> <plplot-de...@lists.sourceforge.net>; Phil Rosenberg
> *Subject:* Re: [Plplot-general] More questions about install
>
> Phil,
>
> I am at the point where I have been able to successfully build new
> projects for wxWidgets and PLplot independently from scratch,
> compile-link-run.
> I copied some code from a wxPLplotDemo into a new GUI I've developed.
>
> The following declaration gives an error,
>
> wxPLplotwindow* plotwindow;
>
> "argument list missing"
>
> Should the format be
>
> wxPLplotwindow<type> etc
>
> or is there still an issue with the wx drivers? I have header, lib, and
> dll for wxwidgets functions, and enable_wxwidgets = ON was present in the
> cmake output.
>
> Thanks in advance for our help.
> David
>
>
> On Friday, February 2, 2018, 12:14:04 PM EST, Phil Rosenberg <
> p.d.rosenb...@gmail.com> wrote:
>
>
> Hi David
> Integrating wxWidgets into PLplot should be as simple as defining the
> WXWIN system variable before running cmake. Cmake should see that and
> automagically find wxWidgets and build that backend for the library along
> with the example.
>
> Where things may get complicated is matching the library settings for
> Unicode, static vs dynamic runtimes and debug vs release builds. I'm not
> sure if these only need matching for static libraries or if dlls need these
> matching too.
>
> If you have any trouble just drop us an email.
>
> Phil
>
> On Feb 2, 2018 14:37, "David Bergman" <davidrbergman
> <davidrberg...@yahoo.com>@yahoo.com <davidrberg...@yahoo.com>> wrote:
>
> Phil,
>
> Thanks for reaching out.
> At this point the VS IDE build and install has never worked right, without
> massive errors. The latest trial produced the release version without
> error but not the debug.
>
> Following the instructions for a command line build, with help from Arjen,
> in windows (not Cygwin) produced a directory without errors. The IDE build
> and the command prompt build are significantly different in the content (in
> my opinion).
>
> I've been able to build a VS project from scratch using PLplot headers and
> dll and it worked. So, I'm counting that as a success. I have not yet had
> a chance to do more complex plots, fully test the functions, or integrate
> with widgets which is my intent. I may need more help in the future.
>
> I will say that there was one dll that the VS compiler/linker said was
> corrupted but I don't recall which one.
> Just to get past it and get something working I deleted this from the
> project. It may come back to bite me later.
>
> David
>
>
>
> On Friday, February 2, 2018, 9:23:06 AM EST, Phil Rosenberg <
> p.d.rosenb...@gmail.com> wrote:
>
>
> Hi David
> I would have gotten involved in this thread earlier if I had realised it
> had moved to Visual Studio an wxWidgets and away from Cygwin. Sorry for
> just reading the title and not the text.
>
> I always use the visual studio IDE, I don't know if that is the route you
> ended up going down. Have you found the instructions at
> https://sourceforge.net/p/
>
> <https://sourceforge.net/p/plplot/wiki/Configure_PLplot_for_the_Visual_Studio_IDE/>
> plplot
> <https://sourceforge.net/p/plplot/wiki/Configure_PLplot_for_the_Visual_Studio_IDE/>/wiki/Configure_PLplot_
> for_the_Visual_Studio_IDE/
> <https://sourceforge.net/p/plplot/wiki/Configure_PLplot_for_the_Visual_Studio_IDE/>?
> They are a little out of date, but I don't think much has changed.
>
> Phil
>
> On 26 January 2018 at 14:57, David Bergman via Plplot-general <plplot
> <plplot-general@lists.sourceforge.net>-general@lists. sourceforge.net
> <plplot-general@lists.sourceforge.net>> wrote:
>
> That worked. Are there any good tutorials for using this with wxWidgets
> and VC++?
> I think I need to set up the wxWidgets driver.
> You may hear from me again...
> David
>
>
> On Friday, January 26, 2018, 9:38:32 AM EST, Arjen Markus <
> arjen.mar...@deltares.nl> wrote:
>
>
> Hi David,
>
> That is easier – did you install the stuff via “nmake install” or are you
> working from the build directory?
>
> That is what I usually do and then I have to expand the PATH environment
> variable:
>
> set PATH=d:\plplot-build-dir\dll;% PATH%
> cd examples\cxx
> x01.exe
>
> Fill in the right directory for “plplot-build-dir” above.
>
> Regards,
>
> Arjen
>
> *From:* David Bergman [mailto:davidrbergman@yahoo. com
> <davidrberg...@yahoo.com>]
> *Sent:* Friday, January 26, 2018 3:34 PM
> *To:* Arjen Markus
> *Cc:* Plplot <Plplot-general@lists.sourceforge.net>-general@lists.
> sourceforge.net <Plplot-general@lists.sourceforge.net> (plplot
> <plplot-general@lists.sourceforge.net>-general@lists. sourceforge.net
> <plplot-general@lists.sourceforge.net>)
> *Subject:* Re: RE: RE: [Plplot-general] More questions about install
>
> Arjen,
> Thanks, that worked to get past this hurdle. nmake and nmake install
> worked.
> Frankly, I'm not sure what state plplot is in but I tried running an
> example exe and got an error message that plplotcxx.dll is not installed on
> my computer.
> However, this *.dll does exists in the dll folder.
> How does that work?
> David
>
>
> On Friday, January 26, 2018, 8:15:24 AM EST, Arjen Markus <
> arjen.mar...@deltares.nl> wrote:
>
>
> Hi David,
>
> I was a bit hasty, I think – the cairo device driver actually consists of
> a whole slew of them and you would have to set all of them to off to avoid
> the cairo device (things like PLD_wincairo and PLD_epscairo). If I read the
> CMake files correctly, then you should be able to turn off that family of
> devices by -DDEFAULT_NO_CAIRO_DEVICES=ON. (I hope I am right this time)
>
> Regards,
>
> Arjen
>
>
> *From:* David Bergman [mailto:davidrbergman@yahoo. com
> <davidrberg...@yahoo.com>]
> *Sent:* Thursday, January 25, 2018 2:12 PM
> *To:* Arjen Markus
> *Cc:* Plplot <Plplot-general@lists.sourceforge.net>-general@lists.
> sourceforge.net <Plplot-general@lists.sourceforge.net> (plplot
> <plplot-general@lists.sourceforge.net>-general@lists. sourceforge.net
> <plplot-general@lists.sourceforge.net>)
> *Subject:* Re: RE: [Plplot-general] More questions about install
>
> Arjen,
> Thanks. I tried again with your suggestion but the following warning.
>
> CMake Warning:
> Manually-specified variables were not used by the project:
>
> PLD_cairo
>
> I tried variant, e.g. all cap, etc, just in case there was a typo. No
> luck.
>
> Any other suggestions would be appreciated.
> On another note, not sure is you saw my other email status. Installing
> from the IDE seemed to work for the Release build but not the Debug,
> several projects failed to build. I cannot decipher why one would build
> and the other not. Additionally the *.exe for the examples did not get
> created as in previous installs. It seems that each try produces a
> different state.
>
> Thank you in advance.
> David
>
>
>
> On Thursday, January 25, 2018, 2:44:51 AM EST, Arjen Markus <
> arjen.mar...@deltares.nl> wrote:
>
>
> Hi David,
>
> Wrt your message (it got caught in my spam filter for reasons best known
> to itself):
>
> “Arjen,
>
> I just installed CMake 3.9.4 and tried the build from a DOS command prompt
> (not using VS INSTALL). Same issues, partial output is attached.
> It crashes at ciaro [26%]. Do I need ciaro to use plplot?
>
> David”
>
> Apparently the build system is finding libraries that are connected to the
> cairo device. Unfortunately, they are not truly compatible. The best way to
> take care of that is to use the option –DPLD_cairo=OFF, forcing the build
> system to ignore that device. This kind of things sometimes happens.
>
> Regards,
>
> Arjen
>
>
>
> *Arjen** Markus*
> Sr. Adviseur/Onderzoeker
> T
> +31(0)88 335 8559
> E
> arjen.mar...@deltares.nl
>
>
> * www.deltares.com* <http://www.deltares.com/>
> Postbus <http://www.deltares.com/>
> 177 <http://www.deltares.com/>
> 2600 MH Delft <http://www.deltares.com/>
>
>
> Please consider the environment before printing this email
> <http://www.deltares.com/>
> DISCLAIMER: This message is intended exclusively for the addressee(s) and
> may contain confidential and privileged information. If you are not the
> intended recipient please notify the sender immediately and destroy this
> message. Unauthorized use, disclosure or copying of this message is
> strictly prohibited. The foundation ' <http://www.deltares.com/>Stichting
> <http://www.deltares.com/> <http://www.deltares.com/>Deltares
> <http://www.deltares.com/>', which has its seat at Delft, The
> Netherlands, Commercial Registration Number 41146461, is not liable in any
> way whatsoever for consequences and/or damages resulting from the improper,
> incomplete and untimely dispatch, receipt and/or content of this e-mail.
> <http://www.deltares.com/>
> DISCLAIMER: This message is intended exclusively for the addressee(s) and
> may contain confidential and privileged information. If you are not the
> intended recipient please notify the sender immediately and destroy this
> message. Unauthorized use, disclosure or copying of this message is
> strictly prohibited. The foundation 'Stichting Deltares', which has its
> seat at Delft, The Netherlands, Commercial Registration Number 41146461, is
> not liable in any way whatsoever for consequences and/or damages resulting
> from the improper, incomplete and untimely dispatch, receipt and/or content
> of this e-mail.
> DISCLAIMER: This message is intended exclusively for the addressee(s) and
> may contain confidential and privileged information. If you are not the
> intended recipient please notify the sender immediately and destroy this
> message. Unauthorized use, disclosure or copying of this message is
> strictly prohibited. The foundation 'Stichting Deltares', which has its
> seat at Delft, The Netherlands, Commercial Registration Number 41146461, is
> not liable in any way whatsoever for consequences and/or damages resulting
> from the improper, incomplete and untimely dispatch, receipt and/or content
> of this e-mail.
>
> ------------------------------ ------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> ______________________________ _________________
> Plplot-general mailing list
> Plplot <Plplot-general@lists.sourceforge.net>-general@lists.
> sourceforge.net <Plplot-general@lists.sourceforge.net>
> https://lists.sourceforge.net/ lists/
> <https://lists.sourceforge.net/lists/listinfo/plplot-general>listinfo
> <https://lists.sourceforge.net/lists/listinfo/plplot-general>/
> <https://lists.sourceforge.net/lists/listinfo/plplot-general>plplot
> <https://lists.sourceforge.net/lists/listinfo/plplot-general>-general
> <https://lists.sourceforge.net/lists/listinfo/plplot-general>
>
>
>
>
>
>
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Plplot-general mailing list
Plplot-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/plplot-general
