On Sun, Jun 17, 2007 at 12:18:46AM +0800, GOvvin wrote: > My computer is hanging for no apparent reason. At least, it wasn't > apparent to me. All I get is a blank white screen, with the keyboard > dead. And all I can do is reset the computer.
> I'm using 64-bit Ubuntu 7.04 though I've experienced the same problem in > prior versions, they don't seem to be as often as they are now. I'd like > to know what's the best way of determining the problem *after* a reboot. > Attached is the results from uname -a, dmesg, and lspci -vnn for system > information > Sun Jun 17 00:15:38 PHT 2007 > $ uname -a > Linux kulasa 2.6.20-16-generic #2 SMP Thu Jun 7 19:00:28 UTC 2007 x86_64 > GNU/Linux > $ dmesg > [ 0.000000] Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc > version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 19:00:28 UTC 2007 > (Ubuntu 2.6.20-16.29-generic) > [ 0.000000] Command line: root=UUID=329cc213-f7ab-41b2-a998-885d7b5edee7 > ro quiet splash > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000001df40000 (usable) > [ 0.000000] BIOS-e820: 000000001df40000 - 000000001df50000 (ACPI data) > [ 0.000000] BIOS-e820: 000000001df50000 - 000000001e000000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000001e000000 - 0000000020000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used > [ 0.000000] Entering add_active_range(0, 256, 122688) 1 entries of 3200 > used > [ 0.000000] end_pfn_map = 1048576 > [ 0.000000] DMI 2.3 present. > [ 0.000000] ACPI: RSDP (v000 MSI ) @ > 0x00000000000f83d0 > [ 0.000000] ACPI: RSDT (v001 MSI 1013 0x01092006 MSFT 0x00000097) @ > 0x000000001df40000 > [ 0.000000] ACPI: FADT (v002 MSI 1013 0x01092006 MSFT 0x00000097) @ > 0x000000001df40200 > [ 0.000000] ACPI: MADT (v001 MSI OEMAPIC 0x01092006 MSFT 0x00000097) @ > 0x000000001df40300 > [ 0.000000] ACPI: WDRT (v001 MSI MSI_OEM 0x01092006 MSFT 0x00000097) @ > 0x000000001df40360 > [ 0.000000] ACPI: MCFG (v001 MSI OEMMCFG 0x01092006 MSFT 0x00000097) @ > 0x000000001df403b0 > [ 0.000000] ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @ > 0x000000001df43750 > [ 0.000000] ACPI: OEMB (v001 MSI MSI_OEM 0x01092006 MSFT 0x00000097) @ > 0x000000001df50040 > [ 0.000000] ACPI: DSDT (v001 MSI 1013 0x01092006 INTL 0x02002026) @ > 0x0000000000000000 > [ 0.000000] Scanning NUMA topology in Northbridge 24 > [ 0.000000] Number of nodes 1 > [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000001df40000 > [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used > [ 0.000000] Entering add_active_range(0, 256, 122688) 1 entries of 3200 > used > [ 0.000000] NUMA: Using 63 for the hash shift. > [ 0.000000] Using node hash shift of 63 > [ 0.000000] Bootmem setup node 0 0000000000000000-000000001df40000 > [ 0.000000] No mptable found. > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0 -> 4096 > [ 0.000000] DMA32 4096 -> 1048576 > [ 0.000000] Normal 1048576 -> 1048576 > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0 -> 159 > [ 0.000000] 0: 256 -> 122688 > [ 0.000000] On node 0 totalpages: 122591 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 1084 pages reserved > [ 0.000000] DMA zone: 2859 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 1621 pages used for memmap > [ 0.000000] DMA32 zone: 116971 pages, LIFO batch:31 > [ 0.000000] Normal zone: 0 pages used for memmap > [ 0.000000] ATI board detected. Disabling timer routing over 8254. > [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] Processor #0 (Bootup-CPU) > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] Setting APIC routing to physical flat > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 > [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000 > [ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 30000000 (gap: > 20000000:dff80000) > [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs > [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data > [ 0.000000] Built 1 zonelists. Total pages: 119830 > [ 0.000000] Kernel command line: > root=UUID=329cc213-f7ab-41b2-a998-885d7b5edee7 ro quiet splash > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) > [ 7.429970] Console: colour VGA+ 80x25 > [ 7.430538] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) > [ 7.430935] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) > [ 7.431001] Checking aperture... > [ 7.431005] CPU 0: aperture @ 2008000000 size 32 MB > [ 7.431007] Aperture too small (32 MB) > [ 7.442927] No AGP bridge found > [ 7.450055] Memory: 471616k/490752k available (2217k kernel code, 18748k > reserved, 1162k data, 304k init) > [ 7.527054] Calibrating delay using timer specific routine.. 3187.22 > BogoMIPS (lpj=6374448) > [ 7.527124] Security Framework v1.0.0 initialized > [ 7.527131] SELinux: Disabled at boot. > [ 7.527159] Mount-cache hash table entries: 256 > [ 7.527334] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 7.527337] CPU: L2 Cache: 1024K (64 bytes/line) > [ 7.527340] CPU 0/0 -> Node 0 > [ 7.527362] SMP alternatives: switching to UP code > [ 7.527609] Freeing SMP alternatives: 28k freed > [ 7.527738] Early unpacking initramfs... done > [ 7.896164] ACPI: Core revision 20060707 > [ 7.896659] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not > found, using machine DSDT. > [ 7.939438] ..MP-BIOS bug: 8254 timer not connected to IO-APIC > [ 7.979516] Using local APIC timer interrupts. > [ 8.042312] result 12436745 > [ 8.042314] Detected 12.436 MHz APIC timer. > [ 8.042916] Brought up 1 CPUs > [ 8.042959] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. > [ 8.042961] time.c: Detected 1591.902 MHz processor. > [ 8.043315] Time: 0:02:48 Date: 05/17/107 > [ 8.043357] NET: Registered protocol family 16 > [ 8.043448] ACPI: bus type pci registered > [ 8.043455] PCI: Using configuration type 1 > [ 8.048284] ACPI: Interpreter enabled > [ 8.048287] ACPI: Using IOAPIC for interrupt routing > [ 8.048733] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 8.048739] PCI: Probing PCI hardware (bus 00) > [ 8.049738] Boot video device is 0000:01:05.0 > [ 8.050330] PCI: Transparent bridge - 0000:00:14.4 > [ 8.050409] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 > (-#03) (try 'pci=assign-busses') > [ 8.050412] Please report the result to linux-kernel to fix this > permanently > [ 8.050440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 8.059324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > [ 8.067249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP2._PRT] > [ 8.069835] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 10 11 12 14 15) > *0, disabled. > [ 8.070064] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 10 11 12 14 15) > *0, disabled. > [ 8.070292] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 7 10 11 12 14 15) > *0, disabled. > [ 8.070520] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 10 11 12 14 15) > *0, disabled. > [ 8.070748] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 10 11 12 14 15) > *0, disabled. > [ 8.070981] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 10 11 12 14 15) > *0, disabled. > [ 8.071213] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 11 12 14 15) > *0, disabled. > [ 8.071442] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 10 11 12 14 15) > *0, disabled. > [ 8.071551] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 8.071561] pnp: PnP ACPI init > [ 8.074395] pnp: PnP ACPI: found 11 devices > [ 8.074448] PCI: Using ACPI for IRQ routing > [ 8.074451] PCI: If a device doesn't work, try "pci=routeirq". If it > helps, post a report > [ 8.074559] NET: Registered protocol family 8 > [ 8.074561] NET: Registered protocol family 20 > [ 8.075531] PCI: Bridge: 0000:00:01.0 > [ 8.075534] IO window: d000-dfff > [ 8.075538] MEM window: fbe00000-fbefffff > [ 8.075542] PREFETCH window: f4000000-faffffff > [ 8.075553] PCI: Bus 3, cardbus bridge: 0000:02:05.0 > [ 8.075556] IO window: 0000e000-0000e0ff > [ 8.075561] IO window: 0000e400-0000e4ff > [ 8.075568] PREFETCH window: 30000000-33ffffff > [ 8.075574] MEM window: 38000000-3bffffff > [ 8.075580] PCI: Bridge: 0000:00:14.4 > [ 8.075584] IO window: e000-efff > [ 8.075590] MEM window: fbf00000-fbffffff > [ 8.075596] PREFETCH window: 30000000-35ffffff > [ 8.075636] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 8.075723] NET: Registered protocol family 2 > [ 8.106929] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) > [ 8.107040] TCP established hash table entries: 16384 (order: 6, 262144 > bytes) > [ 8.107317] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) > [ 8.107460] TCP: Hash tables configured (established 16384 bind 8192) > [ 8.107462] TCP reno registered > [ 8.118963] checking if image is initramfs... it is > [ 8.847642] Freeing initrd memory: 6825k freed > [ 8.854854] audit: initializing netlink socket (disabled) > [ 8.854869] audit(1182038568.336:1): initialized > [ 8.855031] VFS: Disk quotas dquot_6.5.1 > [ 8.855049] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 8.855102] io scheduler noop registered > [ 8.855105] io scheduler anticipatory registered > [ 8.855107] io scheduler deadline registered > [ 8.855121] io scheduler cfq registered (default) > [ 8.881028] Real Time Clock Driver v1.12ac > [ 8.881079] Linux agpgart interface v0.102 (c) Dave Jones > [ 8.881082] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ > sharing enabled > [ 8.881633] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> > IRQ 17 > [ 8.881643] ACPI: PCI interrupt for device 0000:00:14.6 disabled > [ 8.881726] mice: PS/2 mouse device common for all mice > [ 8.882297] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 > blocksize > [ 8.882509] input: Macintosh mouse button emulation as /class/input/input0 > [ 8.882586] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > [ 8.882590] ide: Assuming 33MHz system bus speed for PIO modes; override > with idebus=xx > [ 8.882868] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 > irq 1,12 > [ 8.883205] i8042.c: Detected active multiplexing controller, rev 1.1. > [ 8.883284] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 8.883288] serio: i8042 AUX0 port at 0x60,0x64 irq 12 > [ 8.883291] serio: i8042 AUX1 port at 0x60,0x64 irq 12 > [ 8.883294] serio: i8042 AUX2 port at 0x60,0x64 irq 12 > [ 8.883297] serio: i8042 AUX3 port at 0x60,0x64 irq 12 > [ 8.883454] TCP cubic registered > [ 8.883463] NET: Registered protocol family 1 > [ 8.883580] ACPI: (supports S0 S1 S3 S4 S5) > [ 8.883632] Magic number: 11:234:1 > [ 8.883637] hash matches device ttye9 > [ 8.883647] hash matches device ttybc > [ 8.883772] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) > [ 8.883896] Freeing unused kernel memory: 304k freed > [ 8.886709] input: AT Translated Set 2 keyboard as /class/input/input1 > [ 10.092604] Capability LSM initialized > [ 10.131618] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > [ 10.135455] ACPI: Thermal Zone [THRM] (41 C) > [ 10.642690] usbcore: registered new interface driver usbfs > [ 10.642717] usbcore: registered new interface driver hub > [ 10.642742] usbcore: registered new device driver usb > [ 10.643538] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) > Driver > [ 10.643573] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 10.643590] ohci_hcd 0000:00:13.0: OHCI Host Controller > [ 10.643764] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus > number 1 > [ 10.643788] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfbdfd000 > [ 10.718049] usb usb1: configuration #1 chosen from 1 choice > [ 10.718078] hub 1-0:1.0: USB hub found > [ 10.718092] hub 1-0:1.0: 4 ports detected > [ 10.741668] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) > [ 10.786354] ieee1394: Initialized config rom entry `ip1394' > [ 10.821977] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 10.821999] ohci_hcd 0000:00:13.1: OHCI Host Controller > [ 10.822026] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus > number 2 > [ 10.822046] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfbdfe000 > [ 10.881987] usb usb2: configuration #1 chosen from 1 choice > [ 10.882019] hub 2-0:1.0: USB hub found > [ 10.882032] hub 2-0:1.0: 4 ports detected > [ 10.985992] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 10.986012] ehci_hcd 0000:00:13.2: EHCI Host Controller > [ 10.986042] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus > number 3 > [ 10.986105] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbdff000 > [ 10.986118] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 > Dec 2004 > [ 10.986223] usb usb3: configuration #1 chosen from 1 choice > [ 10.986249] hub 3-0:1.0: USB hub found > [ 10.986256] hub 3-0:1.0: 8 ports detected > [ 11.089907] ATIIXP: IDE controller at PCI slot 0000:00:14.1 > [ 11.089928] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> > IRQ 16 > [ 11.089940] ATIIXP: chipset revision 0 > [ 11.089942] ATIIXP: not 100% native mode: will probe irqs later > [ 11.089953] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, > hdb:pio > [ 11.089969] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, > hdd:pio > [ 11.089980] Probing IDE interface ide0... > [ 11.378041] hda: TOSHIBA MK8026GAX, ATA DISK drive > [ 11.669498] usb 1-2: new low speed USB device using ohci_hcd and address 3 > [ 11.878473] usb 1-2: configuration #1 chosen from 1 choice > [ 11.891471] usbcore: registered new interface driver hiddev > [ 11.896671] input: Logitech USB Optical Mouse as /class/input/input2 > [ 11.896813] input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on > usb-0000:00:13.0-2 > [ 11.896828] usbcore: registered new interface driver usbhid > [ 11.896831] drivers/usb/input/hid-core.c: v2.6:USB HID core driver > [ 12.049473] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > [ 12.098481] Probing IDE interface ide1... > [ 12.833494] hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive > [ 13.169866] ide1 at 0x170-0x177,0x376 on irq 15 > [ 13.182774] SCSI subsystem initialized > [ 13.189612] libata version 2.20 loaded. > [ 13.191236] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an > 8139C+ compatible chip > [ 13.191239] 8139cp 0000:02:03.0: Try the "8139too" driver instead. > [ 13.192769] 8139too Fast Ethernet driver 0.9.28 > [ 13.192817] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> > IRQ 18 > [ 13.193493] eth0: RealTek RTL8139 at 0xffffc20000032c00, > 00:13:d3:f0:2d:98, IRQ 18 > [ 13.193496] eth0: Identified 8139 chip type 'RTL-8101' > [ 13.193582] ACPI: PCI Interrupt 0000:02:05.4[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 13.244855] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] > MMIO=[fbffe000-fbffe7ff] Max Packet=[2048] IR/IT contexts=[8/8] > [ 13.259445] hda: max request size: 128KiB > [ 13.266488] hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) > [ 13.266578] hda: cache flushes supported > [ 13.266614] hda: hda1 hda2 < hda5 hda6 hda7 hda8 > > [ 13.402769] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, > UDMA(33) > [ 13.402778] Uniform CD-ROM driver Revision: 3.20 > [ 13.828084] Attempting manual resume > [ 13.828089] swsusp: Resume From Partition 3:7 > [ 13.828091] PM: Checking swsusp image. > [ 13.847815] PM: Resume from disk failed. > [ 13.888681] EXT3-fs: INFO: recovery required on readonly filesystem. > [ 13.888686] EXT3-fs: write access will be enabled during recovery. > [ 14.516678] ieee1394: Host added: ID:BUS[0-00:1023] GUID[672f01006da337a0] > [ 20.229205] kjournald starting. Commit interval 5 seconds > [ 20.229222] EXT3-fs: recovery complete. > [ 20.229902] EXT3-fs: mounted filesystem with ordered data mode. > [ 31.937023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 31.977645] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device > [ 32.009948] Yenta: CardBus bridge found at 0000:02:05.0 [1462:0221] > [ 32.009979] Yenta O2: res at 0x94/0xD4: 00/ea > [ 32.009981] Yenta O2: enabling read prefetch/write burst > [ 32.139223] Yenta: ISA IRQ mask 0x0eb8, PCI irq 19 > [ 32.139229] Socket status: 30000006 > [ 32.139233] Yenta: Raising subordinate bus# of parent bus (#02) from #03 > to #06 > [ 32.139240] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff > [ 32.139244] pcmcia: parent PCI bridge Memory window: 0xfbf00000 - > 0xfbffffff > [ 32.139248] pcmcia: parent PCI bridge Memory window: 0x30000000 - > 0x35ffffff > [ 32.154670] input: PC Speaker as /class/input/input3 > [ 32.164081] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 32.223839] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 22 (level, low) -> > IRQ 22 > [ 32.223846] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com > [ 32.259809] sdhci: Secure Digital Host Controller Interface driver > [ 32.259813] sdhci: Copyright(c) Pierre Ossman > [ 32.259949] sdhci: SDHCI controller found at 0000:02:05.2 [1217:7120] (rev > 1) > [ 32.259977] ACPI: PCI Interrupt 0000:02:05.2[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 32.259999] sdhci:slot0: Unknown controller version (16). You may > experience problems. > [ 32.260058] mmc0: SDHCI at 0xfbfff800 irq 19 PIO > [ 32.486720] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> > IRQ 17 > [ 32.768824] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> > IRQ 17 > [ 32.820416] input: ImPS/2 Logitech Wheel Mouse as /class/input/input4 > [ 33.458736] fuse init (API version 7.8) > [ 33.524196] lp: driver loaded but no devices found > [ 33.621597] Adding 530104k swap on > /dev/disk/by-uuid/3aa8ad81-e402-41d9-ad29-f40c3b0d8ace. Priority:-1 > extents:1 across:530104k > [ 33.766277] EXT3 FS on hda6, internal journal > [ 34.689002] APIC error on CPU0: 00(40) > [ 38.287924] kjournald starting. Commit interval 5 seconds > [ 38.288061] EXT3 FS on hda8, internal journal > [ 38.288066] EXT3-fs: mounted filesystem with ordered data mode. > [ 38.360592] FAT: utf8 is not a recommended IO charset for FAT filesystems, > filesystem will be case sensitive! > [ 40.187039] NET: Registered protocol family 17 > [ 45.327359] Using specific hotkey driver > [ 45.381978] input: Power Button (FF) as /class/input/input5 > [ 45.386464] ACPI: Power Button (FF) [PWRF] > [ 45.415554] input: Lid Switch as /class/input/input6 > [ 45.420016] ACPI: Lid Switch [LID0] > [ 45.449528] input: Sleep Button (CM) as /class/input/input7 > [ 45.453949] ACPI: Sleep Button (CM) [SLPB] > [ 45.483151] input: Power Button (CM) as /class/input/input8 > [ 45.487663] ACPI: Power Button (CM) [PWRB] > [ 45.530945] ibm_acpi: ec object not found > [ 45.586040] ACPI: Battery Slot [BAT1] (battery present) > [ 45.625989] ACPI: AC Adapter [ADP1] (off-line) > [ 45.680350] No dock devices found. > [ 45.788064] pcc_acpi: loading... > [ 45.989733] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MT-30 > processors (version 2.00.00) > [ 45.989888] ACPI: Invalid package argument > [ 45.989892] ACPI Exception (acpi_processor-0270): AE_BAD_PARAMETER, > Invalid _PSS data [20060707] > [ 45.997649] powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x16 > [ 45.997652] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa > [ 45.999075] powernow-k8: ph2 null fid transition 0x8 > [ 47.368217] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 > Channel > [ 47.368226] rt2500 EEPROM: 6 6 6 6 6 6 6 6 6 6 6 6 6 6 dBm > Maximum > [ 47.665502] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > [ 49.228698] ppdev: user-space parallel port driver > [ 50.380798] Bluetooth: Core ver 2.11 > [ 50.380859] NET: Registered protocol family 31 > [ 50.380861] Bluetooth: HCI device and connection manager initialized > [ 50.380865] Bluetooth: HCI socket layer initialized > [ 50.400904] Bluetooth: L2CAP ver 2.8 > [ 50.400909] Bluetooth: L2CAP socket layer initialized > [ 50.413915] Bluetooth: RFCOMM socket layer initialized > [ 50.413929] Bluetooth: RFCOMM TTY layer initialized > [ 50.413931] Bluetooth: RFCOMM ver 1.8 > [ 50.601128] NET: Registered protocol family 10 > [ 50.601240] lo: Disabled Privacy Extensions > [ 57.516492] ra0: no IPv6 routers present > [ 58.214231] eth0: no IPv6 routers present > [ 95.370760] Losing some ticks... checking if CPU frequency changed. > $ lspci -vnn > 00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge > [1002:5950] (rev 10) > Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] > Flags: bus master, 66MHz, medium devsel, latency 0 > 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] > (prog-if 00 [Normal decode]) > Flags: bus master, 66MHz, medium devsel, latency 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: fbe00000-fbefffff > Prefetchable memory behind bridge: 00000000f4000000-00000000faffffff > Capabilities: [44] HyperTransport: MSI Mapping > Capabilities: [b0] Subsystem: ATI Technologies Inc RS480 PCI Bridge > [1002:5a3f] > 00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host > Controller [1002:4374] (prog-if 10 [OHCI]) > Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller > [1002:4374] > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 > Memory at fbdfd000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > 00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host > Controller [1002:4375] (prog-if 10 [OHCI]) > Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller > [1002:4375] > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 > Memory at fbdfe000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > 00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host > Controller [1002:4373] (prog-if 20 [EHCI]) > Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller > [1002:4373] > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 > Memory at fbdff000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [dc] Power Management version 2 > Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > 00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller > [1002:4372] (rev 10) > Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] > Flags: 66MHz, medium devsel > I/O ports at c800 [size=16] > Memory at fbdfc400 (32-bit, non-prefetchable) [size=1K] > Capabilities: [b0] HyperTransport: MSI Mapping > 00:14.1 IDE interface [0101]: ATI Technologies Inc Standard Dual Channel PCI > IDE Controller ATI [1002:4376] (prog-if 8a [Master SecP PriP]) > Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] > Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 16 > I/O ports at 01f0 [size=8] > I/O ports at 03f4 [size=1] > I/O ports at 0170 [size=8] > I/O ports at 0374 [size=1] > I/O ports at ff00 [size=16] > Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > 00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge > [1002:4377] > Flags: bus master, 66MHz, medium devsel, latency 0 > 00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge > [1002:4371] (prog-if 01 [Subtractive decode]) > Flags: bus master, 66MHz, medium devsel, latency 64 > Bus: primary=00, secondary=02, subordinate=06, sec-latency=64 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: fbf00000-fbffffff > Prefetchable memory behind bridge: 30000000-35ffffff > 00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 > AC'97 Audio Controller [1002:4370] (rev 01) > Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] > Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17 > Memory at fbdfc800 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > 00:14.6 Modem [0703]: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller > [1002:4378] (rev 01) (prog-if 00 [Generic]) > Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] > Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17 > Memory at fbdfcc00 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] > Flags: fast devsel > Capabilities: [80] HyperTransport: Host or Secondary Interface > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Address Map [1022:1101] > Flags: fast devsel > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] DRAM Controller [1022:1102] > Flags: fast devsel > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Miscellaneous Control [1022:1103] > Flags: fast devsel > 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc ATI Radeon > XPRESS 200M 5955 (PCIE) [1002:5955] (prog-if 00 [VGA]) > Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0131] > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 > Memory at f4000000 (32-bit, prefetchable) [size=64M] > I/O ports at d800 [size=256] > Memory at fbef0000 (32-bit, non-prefetchable) [size=64K] > Expansion ROM at fbec0000 [disabled] [size=128K] > Capabilities: [50] Power Management version 2 What driver do you use for your graphics card? -- Ralph Bacolod,RMT,MT http://rbacolod.blogspot.com _________________________________________________ Philippine Linux Users' Group (PLUG) Mailing List [email protected] (#PLUG @ irc.free.net.ph) Read the Guidelines: http://linux.org.ph/lists Searchable Archives: http://archives.free.net.ph
