One comment:
So that access to both hard drives will be fast, put BOTH hard drives as
master, one on each ide channel.
so you will be using hda, and hdc, not hda and hdb.
Access to an IDE master is much faster than a slave drive.
On Fri, 06 Oct 2000, you wrote:
> On Fri, 6 Oct 2000, Mark Hernandez wrote:
>
> >
> > For a start, I will set up a proxy/caching server with an RH 6.2 O.S.
> > Should I make these
> > partitions:
> > Note: I have two separate 9 GBs and i have partition it with these
> >
> > What should partition should I give priority? /cache or /var?
> >
> > For a proxy server, would this partitions and their sizes be enough?
> >
> > any suggestions?
>
> Are you going to use RPM squid? If yes, ang mount point mo sa sdb2 is
> /var.
>
> Diba you'll use your linux box for squid caching proxy only? If YES,
> ang suggestion ko ganito para hindi na mahirap ang pag-partition.
>
> 1. for the primary master SCSI HD
> sda1: /boot = 60Mb
> sda2: swap = 127Mb
> sda3: / = 1.7 Gb
> sda4: /usr = for the remaining hardisk space
>
> / or (root), your configuration files and the files necessary to boot
> linux are located there.
>
> /usr, your applications will be installed there.
> Also, the squid logs (access, store, cache) will be stored there.
>
> 2. for the primary slave SCSI HD
> sdb1: swap = 127Mb
> sdb2: /cache or /var instead if RPM squid will be installed.
>
> Take note:
> Use only 7Gb to 7.5 Gb for your sdb2 cache_dir so that di mahirapan si
> squid pag-puno na ang cache_dir. Kailangan may allowance. OK. :)
>
> Medyo napahaba ang suggestion ko.
>
> Any inputs sa mga expert?
>
> HTH.
> :)
>
> ---
> roi
>
>
> _
> Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
> To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
_
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
