Quoting Gerald Timothy Quimpo ([EMAIL PROTECTED]): > setserial -a /dev/ttyS0 > /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 > Baud_base: 115200, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal skip_test > > and in reply to Pong, no, it's not a winmodem, it's a Supra 56K > Express External USB modem on ttyS0.
It still could be a winmodem, you know. What determines that is whether it uses a chipset that omits some required functions, relying on those to be furnished by "engine" software, instead. Supra have definitely been known to use winmodem chipsets, such as Conexant/Rockwell HCF and HSF, Agere/Lucent LT, and others. But they also use traditional hardware-modem chipsets. If it were mine, I'd check its casing to see if it could be safely opened to examine the circuit board and jot down whatever's written on the largest chip, and then compare that against the information on http://www.idir.net/~gromitkc/winmodem.html That would not solve the larger issue of getting Linux talking to your modem fruitfully, but would at least address the winmodem question. -- Cheers, "Transported to a surreal landscape, a young girl kills the first Rick Moen woman she meets, and then teams up with three complete strangers [EMAIL PROTECTED] to kill again." -- Rick Polito's That TV Guy column, describing the movie _The Wizard of Oz_ _ Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph To leave: send "unsubscribe" in the body to [EMAIL PROTECTED] To subscribe to the Linux Newbies' List: send "subscribe" in the body to [EMAIL PROTECTED]
