Michael, May I ask what amateur apps you are going to be using? gprsd and some others sound like something with aprs, or it could be with winlink, or a packet radio stack. I am using MMDVM on a RPi and it writes a LOT to the little memory card, but it goes and goes. So even a very busy aprs system will not see a lot of writing. I use the Samsung SSD's. I figure you are using one small POS or other devices, most are 19vdc but some are 12vdc (nice for vehicular usage) you indicated it used a 3" SATA drive, there are a lot of SSD 2" drives that have a kit for putting them in a 3" space. As in any device that it writing to memory make sure your 12v mains are reliable and will not drop out from under the computer. Call here is KP4DJT, Google it.
On Sat, May 18, 2019 at 2:20 PM Bill Barry <[email protected]> wrote: > On Sat, May 18, 2019 at 4:06 PM Michael Barnes <[email protected]> > wrote: > > > I haven't messed with much in the hardware department for years. I > recently > > picked up a small 12V computer I want to use for some field applications > in > > ham radio. It presently has a conventional 160 GB SATA WD Caviar Blue > drive > > in it now. I'd like to replace that with a comparable SSD that is > hopefully > > just plug and play with the existing SATA connectors. Is that possible? > My > > intent is to just load a basic Linux install (probably CentOS) from a USB > > stick and run a few basic services. It will have a USB GPS puck and run > > gpsd and ntp. I'll run the normal network server stuff of dhcp, dns, > etc. I > > guess Samba is still the thing for a file server. It will not be > connected > > to the Internet when in the field. The field network will be a bunch of > > Windows laptops and will need to share some files across the network with > > the server. > > > > So, all that to ask, what should I get for an SSD for this thing? This > is a > > low budget project. > > > > Thanks for your ideas. > > Michael > > > > SSD drives do come in a few formats. If you are replacing a laptop format > drive get a 2.5 in SATA. Your current SATA connectors will work. If it is > a desktop slot you might have to get some brackets to put it in the larger > slot. > > Bill > _______________________________________________ > PLUG mailing list > [email protected] > http://lists.pdxlinux.org/mailman/listinfo/plug > -- Chuck Hast -- KP4DJT -- I can do all things through Christ which strengtheneth me. Ph 4:13 KJV Todo lo puedo en Cristo que me fortalece. Fil 4:13 RVR1960 _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
