On Tue, 2 Feb 2021 17:07:45 -0800 Ben Koenig <[email protected]> dijo:
> smartctl -a /dev/nvme0n1 OK, this is really weird. All this time nvme0 has been the 1TB m.2 Samsung drive inside the Thinkpad, which holds / and /home. I was amazed when I ran the command exactly as above and it said the drive was a 7.68TB Intel NVMe. I continued, incrementing the number each time I ran the command, and the 1TB Samsung is now nvme4n1. I had been perplexed with why nvme4n1 had two partitions, because I was thinking it was part of the array. The mdadm command that I used to create the array listed nvme1, nvme2, nvme3, and nvme4, in that order. I copied the command from the terminal and put it in a text file to save it, and I verified just now that I did not misremember. Drive nvme4 was originally part of the array, and now it is the m.2 drive, while the array is now made of nvme0-3. I have long been aware that drive labeling like sda, sdb, etc. can annoyingly swap around. Apparently NVMe drives can be just as exasperating. As for the results of the command on the drives in the array, there were no errors reported, and everything else looked normal. _______________________________________________ PLUG: https://pdxlinux.org PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
