Dear List: I have recently acquired a PB180 with a PowerLogix G3/233 upgrade board. It has OS 9.1 installed and from what I can tell the correct PowerLogix G3 Driver.
It has a 2 GB HD; CD-ROM drive; zip 100, non-working Jazz drive (do I need to keep this in for scsi termination?); ethernet, video and usb cards in the PCI slots. The first few times I started it up I was able to get to the desktop and even launch internet explorer, but as soon as I tried to down load anything, the machine would crash. Now the machine does some of the following: 1) It will boot up to the desktop, but opening any folder will cause it to freeze. 2) It will get to the desktop, but if I try to open the extensions manager it will freeze. 3) Sometimes it doesn't get past the initial boot and freezes on a blank generic blue screen ( without showing the drive or any files -- just the blue embossed OS logo. I have tried booting from a CD, but holding down the "C" key during startup doesn't seem to have any effect. Any and all suggestions are welcome as I am completely lost here. Thanks, Spencer -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:powercomputing@;mail.maclaunch.com> To unsubscribe, email: <mailto:powercomputing-off@;mail.maclaunch.com> For digest mode, email: <mailto:powercomputing-digest@;mail.maclaunch.com> Subscription questions: <mailto:listmom@;lemlists.com> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
