Thanks to everyone who responded to the request for rad information on
control rod spud ends. I have all the data necessary.
Regards
Tom Meek, CHP
On 8/4/2011 6:01 AM, JOHNSON, VICTOR wrote:
The highest we've seen at Grand Gulf was ~8 R/hR. typically ~1 R/hR. These
rates are when it comes out of the reactor.
Vic Johnson
Central Calibration Facility
Grand Gulf Nuclear Station
601.437.2161
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
Orionhp
Sent: Wednesday, August 03, 2011 6:11 PM
To: [email protected]
Subject: Powernet: BWR control `spud end' radiation levels
I hope my BWR colleagues can help me with a question.
What are the radiation levels of a typical control rod spud end and how
many days decay between removal from the reactor and the measurement?
I am a PWR type and am working on a BWR decommissioning project.
Thanks for any help
Tom Meek
-----------------------------------
Powernet - a service of the Health Physics Society Power Reactor Section
Powernet archives at http://www.mail-archive.com/[email protected]/
Reply to: [email protected]
If Questions, contact Mike Russell, CHP at [email protected]
-----------------------------------
Powernet - a service of the Health Physics Society Power Reactor Section
Powernet archives at http://www.mail-archive.com/[email protected]/
Reply to: [email protected]
If Questions, contact Mike Russell, CHP at [email protected]
-----------------------------------
Powernet - a service of the Health Physics Society Power Reactor Section
Powernet archives at http://www.mail-archive.com/[email protected]/
Reply to: [email protected]
If Questions, contact Mike Russell, CHP at [email protected]
