At STP:
1. I&C performs the calibrations 2. I&C is qualified to handle sources. RP supports only if necessary for the hottest sources. [STP Logo] Eric G. Hood Staff Health Physicist - ALARA (361)972-7928 From: Powernet [mailto:[email protected]] On Behalf Of Dave Raye via Powernet Sent: Monday, January 28, 2019 9:48 AM To: '[email protected]' <[email protected]> Cc: Dave Raye <[email protected]> Subject: [Powernet] Fixed Radiation Monitoring System calibration question **THIS EMAIL IS FROM AN EXTERNAL SENDER OUTSIDE OF THE STPNOC NETWORK. BE CAUTIOUS ABOUT CLICKING LINKS OR OPENING ATTACHMENTS FROM UNKNOWN SOURCES. DO NOT PROVIDE PERSONAL INFORMATION SUCH AS SS#, USER ID/PASSWORD, ETC.** Hello all, At DC Cook, Radiation Protection technicians have always performed calibrations on our permanently-installed, plant (Westinghouse & Eberline) Radiation Monitoring System. I would appreciate your response to the two questions below: 1.) Who performs the detector calibrations on your installed radiation monitoring system... RP/HP techs, MTI/I&C techs, others? 2.) If RP/HP DOES NOT perform your installed RMS detector calibrations, is the department performing the calibrations trained/qualified to handle sources (or does RP escort/handle the sources for them)? Thank you, Dave Raye RP Support Gen Supv Cook Nuclear Plant 269-466-2803 (O) 269-405-6040 (C) 269-422-6161 (H) 2803 (pager)
_______________________________________________ Powernet mailing list [email protected] http://hpspowernet.org/mailman/listinfo/powernet_hpspowernet.org
