On: Thu, 26 Feb 2004 Tariq Dajani wrote: > What I can do to fix the yellow nozzle from firing slightly off target? > Is this caused by a blockage of sorts? Should I persevere with the > Widowlene cleaning method, or try something else such as using cleaning > cartridges? Or is this an Epson engineer repair job?
Try to avoid using windolene, a single drop of distilled water under each nozzle head and an overnight parking is quite enough. But before major surgery with the squirty bottle, do realign the heads with the paper stock you are using and run a CMYKRGB purge print at 180dpi. Remember when realigning the heads to switch off the printer - this forces it to store the settings. Also, is it me or does the yellow run out first? THIS may be the cause of the faint yellow stain.......meaning that it would be wise to keep the 1160 CIS bottles at around about (a) constant two thirds full. William Curwen http://www.william.ws =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
