Paul,

Why don't you just make it from scratch? It's only 8 pins...

(I could understand if you were asking for some large part 100+ pins or
whatever, but an 8 pin SOIC??) It probably took you  more time to write the
email, and read your first response.

No disrespect intended :)

Tony



> -----Original Message-----
> From: TSListServer [mailto:[EMAIL PROTECTED]]On
> Behalf Of Richard Sumner
> Sent: Wednesday, February 07, 2001 3:13 PM
> To: Multiple recipients of list proteledausers
> Subject: Re: [PROTEL EDA USERS]: 8 lead micro SOIC (RM-8) outline?
>
>
> Paul,
>
> I have a footprint for a 10 pin micro-soic using 99se, sp6. I
> built it for
> an AD5322 (analog devices). I've used it and its OK. You could easily
> modify it. If you want it, send me an email direct.
>
> Richard
>
>   At 11:48 AM 2/8/01 +1300, you wrote:
> >Can anyone point to a library with the following:
> >
> >8 lead micro SOIC (RM-8) outline.
> >
> >Also.  Is there an archive for the protel list? Where is it?
> >
> >
> >Paul Gaastra      email:[EMAIL PROTECTED]
> >Technology Development Group, Hort Research
> >Private Bag 3123            phone +64 7 8584745
> >Hamilton, NEW ZEALAND         fax +64 7 8584705
> >
> >
> >
> >* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> >*  This message sent by: PROTEL EDA USERS MAILING LIST
> >*
> >*  Use the "reply" command in your email program to
> >*  respond to this message.
> >*
> >*  To unsubscribe from this mailing list use the form at
> >*  the Association web site. You will need to give the same
> >*  email address you originally used to subscribe (do not
> >*  give an alias unless it was used to subscribe).
> >*
> >*  Visit http://www.techservinc.com/protelusers/subscrib.html
> >*  to unsubscribe or to subscribe a new email address.
> >* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>
>
>
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> *  This message sent by: PROTEL EDA USERS MAILING LIST
> *
> *  Use the "reply" command in your email program to
> *  respond to this message.
> *
> *  To unsubscribe from this mailing list use the form at
> *  the Association web site. You will need to give the same
> *  email address you originally used to subscribe (do not
> *  give an alias unless it was used to subscribe).
> *
> *  Visit http://www.techservinc.com/protelusers/subscrib.html
> *  to unsubscribe or to subscribe a new email address.
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*  This message sent by: PROTEL EDA USERS MAILING LIST
*
*  Use the "reply" command in your email program to
*  respond to this message.
*
*  To unsubscribe from this mailing list use the form at
*  the Association web site. You will need to give the same
*  email address you originally used to subscribe (do not
*  give an alias unless it was used to subscribe).
*
*  Visit http://www.techservinc.com/protelusers/subscrib.html
*  to unsubscribe or to subscribe a new email address.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

________________________________________________________

To leave the EDAFORUM discussion list, send a email with
'leave edaforum' in the body to '[EMAIL PROTECTED]'

More Information : http://www.dolist.net

Reply via email to