Hi Mike,

Check the following address;

http://catalog.tycoelectronics.com/TE/docs/pdf/7/95/158597.pdf

On page 6 of this application note, it lists the pad diameter as 0.044
inches.



Max P. Henzi, CEO
Lavenir Technology
2440 Estand Way
Pleasant Hill, CA 94523
voice: (925) 680-7400  fax: (925) 686-5131 
email: [EMAIL PROTECTED]
Web: www.lavenir.com 

 -----Original Message-----
From:   Michael Reagan [mailto:[EMAIL PROTECTED]] 
Sent:   Tuesday, August 07, 2001 9:13 AM
To:     Protel EDA Forum
Subject:        [PEDA] Amp Connector

Hello All

Does anyone have a footprint for an Amp Connector 536279-1.   I have a data
sheet, however typical AMP datasheet is missing the diameter of the pin.
The data sheet calls for .028 mils and does not indicate if that is hole or
pad size.  On .050 pin spacing, it must be pad size but there is no
indication of the pin diameter.  Any help would be  appreciated.



Mike Reagan
EDSI
Frederick Md
[EMAIL PROTECTED]

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*                      - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to