>From the data sheet it looks like the hole size must be 0.028" since they
are showing the PCB layout and that hole size would work well with 0.050"
spacing. I'll bet the pin size is around 0.018".

I would want to see the part though since the data sheet is missing
important data.

Jeff Adolphs
Lake Shore Cryotronics, Inc.
Westerville, Ohio, USA

-----Original Message-----
From: Michael Reagan [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 07, 2001 12:13 PM
To: Protel EDA Forum
Subject: [PEDA] Amp Connector


Hello All

Does anyone have a footprint for an Amp Connector 536279-1.   I have a data
sheet, however typical AMP datasheet is missing the diameter of the pin.
The data sheet calls for .028 mils and does not indicate if that is hole or
pad size.  On .050 pin spacing, it must be pad size but there is no
indication of the pin diameter.  Any help would be  appreciated.



Mike Reagan
EDSI
Frederick Md
[EMAIL PROTECTED]

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*                      - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to