There is also some Information and tools at:
http://www.gencam.org/



At 06:21 PM 25/09/2001 -0400, you wrote:
Yes very familiar with Genrad.
Unless you have the latest version which includes the new Protel file
convertor, you need to export your Protel PCB file out in Version 2.8 ASCII
format. Then Genrad has a program convertor called Alchemist which converts
to GenCad.cad files.
Hope that helps

Lloyd Good
Engineering Systems Co-ordinator
GE Substation Automation Systems
2728 Hopewell Place NE
Calgary, Alberta, Canada
T1Y 7J7
Tel: (403) 214-4777
Fax:(403) 287-7946
email: [EMAIL PROTECTED]


-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 25, 2001 3:20 PM
To: Protel EDA Forum
Subject: [PEDA] Anyone heard of a GENCAD.CAD file?




Our board house is asking for a GENCAD.CAD file for their flying probe
tester which I believe is made by GenRad.

Has anyone ever heard of this format?

Is this actually a format that Protel will produce, but named wrong?

GenRads web site is less than usefull since anything that might have
information in it is login protected.

The current board that is at issue was done in an OLD version of PCAD which
we don't have running and PCAD 2001 doesn't like the design because the
people who did it thought they were clever and combined power planes and
signal layers in a painful way. So we can't generate the GENCAD.CAD file
for them or the PDIF file they say they could also take. Of course if they
hadn't lost the program they did a year and half ago for this board they
wouldn't have this problem.

thanks,


Rob


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


Regards,

Colin Weber * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to