I only use BNC cables.  Both monitors are Mitsubishi 4040u.  Replacing the video card
with my Matrox G400 creates a perfect image, exactly matched, on both screens.  No
blur at all.

____________
Brian Guralnick


----- Original Message -----
From: <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Monday, December 17, 2001 1:56 PM
Subject: Re: [PEDA] Warning about the ASUS AGP-V7100/2V1D video card.


| In a message dated 12/17/2001 1:46:36 PM Eastern Standard Time,
| [EMAIL PROTECTED] writes:
|
|
| > I just set up a dual head display system with this ASUS dual head video
| > card.  A
| > GeForce2 MX card with dual head output.  It's a lemon.  What ever you do,
| > avoid this
| > card all together.
| >
| > The main video out is a little blurry, but the secondary display is
| > completely blurry
| > at 1280x1024 x 75Hz.  All the letters are pail and thin with some ghosting.
| >
|
| Any chance that you might have some wimpy cables, or that you're using a
| cheap KVM switch? Can you swap those cables, switch, monitor, etc. onto
| another video card to prove that it's really the card? Video signals for that
| setup are pushing well up into 9 digits worth of MHz and really have to be
| handled with care; you may want to do some more testing before condemning the
| video card. I'll be interested to hear the outcome of any further testing.
|
| Steve Hendrix
|
|

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to