Are you sure you are using the right type of coax in your BNC cables? Could be signal reflection from impedance mismatching.
I seem to remember that many coax/BNC cables are 50 ohm. But most video signals are based on 75 ohm termination. You need special 75 ohm BNC cables if you have 75 ohm video equipment. Best regards, Ivan Baggett Bagotronix Inc. website: www.bagotronix.com ----- Original Message ----- From: "Brian Guralnick" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Sent: Monday, December 17, 2001 4:54 PM Subject: Re: [PEDA] Warning about the ASUS AGP-V7100/2V1D video card. > I only use BNC cables. Both monitors are Mitsubishi 4040u. Replacing the video card > with my Matrox G400 creates a perfect image, exactly matched, on both screens. No > blur at all. > > ____________ > Brian Guralnick > > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: "Protel EDA Forum" <[EMAIL PROTECTED]> > Sent: Monday, December 17, 2001 1:56 PM > Subject: Re: [PEDA] Warning about the ASUS AGP-V7100/2V1D video card. > > > | In a message dated 12/17/2001 1:46:36 PM Eastern Standard Time, > | [EMAIL PROTECTED] writes: > | > | > | > I just set up a dual head display system with this ASUS dual head video > | > card. A > | > GeForce2 MX card with dual head output. It's a lemon. What ever you do, > | > avoid this > | > card all together. > | > > | > The main video out is a little blurry, but the secondary display is > | > completely blurry > | > at 1280x1024 x 75Hz. All the letters are pail and thin with some ghosting. > | > > | > | Any chance that you might have some wimpy cables, or that you're using a > | cheap KVM switch? Can you swap those cables, switch, monitor, etc. onto > | another video card to prove that it's really the card? Video signals for that > | setup are pushing well up into 9 digits worth of MHz and really have to be > | handled with care; you may want to do some more testing before condemning the > | video card. I'll be interested to hear the outcome of any further testing. > | > | Steve Hendrix > | > | > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
