we generally have a few unrouted and generally they are surprisingly
easy to put in
Dennis Saputelli
Robison Michael R CNIN wrote:
>
> earlier i posted:
>
> i had a 4 layer board with 2 planes and 2 layers of traces.
> it routed 100% but then was taking forever trying to resolve
> contentions. i stopped it and added two more layers for
> traces.
>
> its now going to 99% routing completion and stopping, with
> 2 connections remaining. this took under 3 minutes. it then
> displays the mentioned information in a design explorer info
> box.
>
> i've never had a routing fail to complete before. what do i
> do? 99% is pretty good, but its probably not enough to make
> the designer happy. ;-)
>
> ****************************************
> update:
>
> i added two more layers for traces and it still refuses
> to complete two nodes. i ran a design rules check with uncompleted traces,
> but i'm showing everything ok in the
> DRC.
>
> any suggestions would be appreciated.
>
> thanks, miker
--
___________________________________________________________________________
www.integratedcontrolsinc.com Integrated Controls, Inc.
tel: 415-647-0480 2851 21st Street
fax: 415-647-3003 San Francisco, CA 94110
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
