You might try disabling all your Design rules and see if it works. Does the board have DRC errors? If you set routing mode to "Ignore obstacles", does that make a difference?
> -----Original Message----- > From: Michael.Payne > Sent: Monday, February 11, 2002 1:00 AM > > Hi John, All, > I've all the routing layers enabled, they appear on the tabs at the bottom > of the working area and as I press the * key whilst routing I can change > layer. What it doesn't do is place a via. I can however use place via (PV) > to place vias after routing. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *